ESCAMBIA: The Light Detection and Ranging (LiDAR) LAS dataset is a survey of select areas within Escambia County, Florida.
These data were produced for Dewberry and Davis LLC. The Escambia County LiDAR Survey project area consists of approximately 803
square miles. The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 6 feet for
unobscured areas. Land Air mapping acquired 110 flightlines between June 21, 2006 and July 18, 2006. The data was divided into
5000' by 5000' foot cells that serve as the tiling scheme. The Escambia County LiDAR Survey was collected under the guidance of a
Professional Mapper/Surveyor.
Dates of Collection: 20060621-20060718 Contractor: Dewberry and Davis, LLC
SANTA ROSA: LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data
as well as intensity data. LiDAR data was processed to achieve a bare ground surface. LiDAR data was delivered in LAS format.
Dates of Collection: 20060112-20060228 Contractor: Photo Science, Inc.
WALTON: LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a
combination of laser range finding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make
highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data of Walton
County, Florida, was collected at sub-meter resolution to provide average point spacing of 0.7m for collected points. Up to 5
returns were recorded for each pulse in addition to an intensity value. No data for Eglin AFB, permission to fly over was ever
granted.
Dates of Collection: 20060710-11, 19-20, 22-23, 26-29, 20060801, 03, 06-07, 13, 15, 17 Contractor: Sanborn
Original contact information:
Contact Org: NOAA Office for Coastal Management
Phone: 843-740-1202
Email: [email protected]
About this Dataset
| Title | 2006 Florida LiDAR: Escambia, Santa Rosa, and Walton Counties |
|---|---|
| Description | ESCAMBIA: The Light Detection and Ranging (LiDAR) LAS dataset is a survey of select areas within Escambia County, Florida. These data were produced for Dewberry and Davis LLC. The Escambia County LiDAR Survey project area consists of approximately 803 square miles. The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 6 feet for unobscured areas. Land Air mapping acquired 110 flightlines between June 21, 2006 and July 18, 2006. The data was divided into 5000' by 5000' foot cells that serve as the tiling scheme. The Escambia County LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. Dates of Collection: 20060621-20060718 Contractor: Dewberry and Davis, LLC SANTA ROSA: LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data as well as intensity data. LiDAR data was processed to achieve a bare ground surface. LiDAR data was delivered in LAS format. Dates of Collection: 20060112-20060228 Contractor: Photo Science, Inc. WALTON: LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser range finding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data of Walton County, Florida, was collected at sub-meter resolution to provide average point spacing of 0.7m for collected points. Up to 5 returns were recorded for each pulse in addition to an intensity value. No data for Eglin AFB, permission to fly over was ever granted. Dates of Collection: 20060710-11, 19-20, 22-23, 26-29, 20060801, 03, 06-07, 13, 15, 17 Contractor: Sanborn Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: [email protected] |
| Modified | 2025-04-04T13:49:09.158Z |
| Publisher Name | N/A |
| Contact | N/A |
| Keywords | EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > TOPOGRAPHICAL RELIEF MAPS , EARTH SCIENCE > OCEANS > BATHYMETRY/SEAFLOOR TOPOGRAPHY > SEAFLOOR TOPOGRAPHY , EARTH SCIENCE > OCEANS > COASTAL PROCESSES > COASTAL ELEVATION , CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > FLORIDA , Contour , Height , Intensity , 2006 , DOC/NOAA/NOS/OCM > Office of Coastal Management, National Ocean Service, NOAA, U.S. Department of Commerce , Lidar , elevation |
{
"identifier": "gov.noaa.nmfs.inport:48209",
"accessLevel": "public",
"contactPoint": {
"@type": "vcard:Contact",
"fn": "Your contact point",
"hasEmail": "mailto:[email protected]"
},
"programCode": [
"010:000"
],
"landingPage": "",
"title": "2006 Florida LiDAR: Escambia, Santa Rosa, and Walton Counties",
"description": "ESCAMBIA: The Light Detection and Ranging (LiDAR) LAS dataset is a survey of select areas within Escambia County, Florida.\nThese data were produced for Dewberry and Davis LLC. The Escambia County LiDAR Survey project area consists of approximately 803\nsquare miles. The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 6 feet for\nunobscured areas. Land Air mapping acquired 110 flightlines between June 21, 2006 and July 18, 2006. The data was divided into\n5000' by 5000' foot cells that serve as the tiling scheme. The Escambia County LiDAR Survey was collected under the guidance of a\nProfessional Mapper\/Surveyor.\nDates of Collection: 20060621-20060718 Contractor: Dewberry and Davis, LLC\n\nSANTA ROSA: LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data\nas well as intensity data. LiDAR data was processed to achieve a bare ground surface. LiDAR data was delivered in LAS format.\nDates of Collection: 20060112-20060228 Contractor: Photo Science, Inc.\n\nWALTON: LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a\ncombination of laser range finding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make\nhighly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data of Walton\nCounty, Florida, was collected at sub-meter resolution to provide average point spacing of 0.7m for collected points. Up to 5\nreturns were recorded for each pulse in addition to an intensity value. No data for Eglin AFB, permission to fly over was ever\ngranted.\nDates of Collection: 20060710-11, 19-20, 22-23, 26-29, 20060801, 03, 06-07, 13, 15, 17 Contractor: Sanborn\n\nOriginal contact information: \n Contact Org: NOAA Office for Coastal Management\n Phone: 843-740-1202\n Email: [email protected]",
"language": "",
"distribution": [
{
"@type": "dcat:Distribution",
"mediaType": "application\/json",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A48209"
},
{
"@type": "dcat:Distribution",
"mediaType": "text\/html",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A48209\/html"
},
{
"@type": "dcat:Distribution",
"mediaType": "application\/xml",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A48209\/xml"
}
],
"bureauCode": [
"010:04"
],
"modified": "2025-04-04T13:49:09.158Z",
"publisher": {
"@type": "org:Organization",
"name": "Your Publisher"
},
"theme": "",
"keyword": [
"EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > TOPOGRAPHICAL RELIEF MAPS",
"EARTH SCIENCE > OCEANS > BATHYMETRY\/SEAFLOOR TOPOGRAPHY > SEAFLOOR TOPOGRAPHY",
"EARTH SCIENCE > OCEANS > COASTAL PROCESSES > COASTAL ELEVATION",
"CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > FLORIDA",
"Contour",
"Height",
"Intensity",
"2006",
"DOC\/NOAA\/NOS\/OCM > Office of Coastal Management, National Ocean Service, NOAA, U.S. Department of Commerce",
"Lidar",
"elevation"
]
}
