The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-03 set of benchmarks. These AMB2022-03 benchmarks explore a range of individual and overlapping melt pool behaviors using individual laser tracks and 2D arrays of laser tracks (pads) on solid metal IN718 plates. For the individual laser tracks, a range of laser parameters was used, with variations in laser power, speed, and spot diameter. For the laser pads, the laser scan patterns and most of the laser parameters match those used for the 2.5 mm legs from the AMB2022-01 3D builds. The laser tracks and pads were cross sectioned at different locations and examined using scanning electron microscopy (SEM) electron backscatter diffraction (EBSD) and energy dispersive spectroscopy (EDS). Descriptions and measurement data for all of the other AMB2022-03 measurements may be found on the AM Bench website at www.nist.gov/ambench.
About this Dataset
Title | AM Bench 2022: Cross sectional microstructure of single laser tracks produced using different processing conditions and 2D arrays of laser tracks (pads) on solid plates of nickel alloy 718 |
---|---|
Description | The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-03 set of benchmarks. These AMB2022-03 benchmarks explore a range of individual and overlapping melt pool behaviors using individual laser tracks and 2D arrays of laser tracks (pads) on solid metal IN718 plates. For the individual laser tracks, a range of laser parameters was used, with variations in laser power, speed, and spot diameter. For the laser pads, the laser scan patterns and most of the laser parameters match those used for the 2.5 mm legs from the AMB2022-01 3D builds. The laser tracks and pads were cross sectioned at different locations and examined using scanning electron microscopy (SEM) electron backscatter diffraction (EBSD) and energy dispersive spectroscopy (EDS). Descriptions and measurement data for all of the other AMB2022-03 measurements may be found on the AM Bench website at www.nist.gov/ambench. |
Modified | 2023-04-28 00:00:00 |
Publisher Name | National Institute of Standards and Technology |
Contact | mailto:[email protected] |
Keywords | additive manufacturing , benchmarks , AM Bench 2022 , LPBF , EBSD , EDS |
{ "identifier": "ark:\/88434\/mds2-2775", "accessLevel": "public", "contactPoint": { "hasEmail": "mailto:[email protected]", "fn": "Lyle E. Levine" }, "programCode": [ "006:045" ], "landingPage": "", "title": "AM Bench 2022: Cross sectional microstructure of single laser tracks produced using different processing conditions and 2D arrays of laser tracks (pads) on solid plates of nickel alloy 718", "description": "The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-03 set of benchmarks. These AMB2022-03 benchmarks explore a range of individual and overlapping melt pool behaviors using individual laser tracks and 2D arrays of laser tracks (pads) on solid metal IN718 plates. For the individual laser tracks, a range of laser parameters was used, with variations in laser power, speed, and spot diameter. For the laser pads, the laser scan patterns and most of the laser parameters match those used for the 2.5 mm legs from the AMB2022-01 3D builds. The laser tracks and pads were cross sectioned at different locations and examined using scanning electron microscopy (SEM) electron backscatter diffraction (EBSD) and energy dispersive spectroscopy (EDS). Descriptions and measurement data for all of the other AMB2022-03 measurements may be found on the AM Bench website at www.nist.gov\/ambench.", "language": [ "en" ], "distribution": "", "bureauCode": [ "006:55" ], "modified": "2023-04-28 00:00:00", "publisher": { "@type": "org:Organization", "name": "National Institute of Standards and Technology" }, "theme": [ "Materials:Metals" ], "keyword": [ "additive manufacturing", "benchmarks", "AM Bench 2022", "LPBF", "EBSD", "EDS" ] }