Data provided by National Institute of Standards and Technology
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were excised from the same size legs (2.5 mm width) of one original AMB2022-01 specimen (AMB2022-718-AMMT-B7-P4). Excised tensile specimens were quasi-static uniaxially tensile tested according to ASTM E8 (strain rate 1*10-3 sec-1, 3 mm gauge length custom contact extensometer). Calibration data given includes all processing and microstructure data from AMB2022-01 (https://www.nist.gov/ambench/am-bench-2022-challenge-problems-and-measu…), including 3D serial sectioning electron backscatter diffraction (EBSD) data (https://doi.org/10.18434/mds2-2767). Material property data such as elastic mechanical properties are not provided.
About this Dataset
Updated: 2025-11-16
Metadata Last Updated:
2025-02-18 00:00:00
Date Created:
N/A
Data Provided by:
Dataset Owner:
N/A
| Title | AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718 |
|---|---|
| Description | This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were excised from the same size legs (2.5 mm width) of one original AMB2022-01 specimen (AMB2022-718-AMMT-B7-P4). Excised tensile specimens were quasi-static uniaxially tensile tested according to ASTM E8 (strain rate 1*10-3 sec-1, 3 mm gauge length custom contact extensometer). Calibration data given includes all processing and microstructure data from AMB2022-01 (https://www.nist.gov/ambench/am-bench-2022-challenge-problems-and-measurement-results), including 3D serial sectioning electron backscatter diffraction (EBSD) data (https://doi.org/10.18434/mds2-2767). Material property data such as elastic mechanical properties are not provided. |
| Modified | 2025-02-18 00:00:00 |
| Publisher Name | National Institute of Standards and Technology |
| Contact | mailto:[email protected] |
| Keywords | additive manufacturing , 3D printing , inconel , nickel superalloy , 718 , powder bed fusion , laser powder bed fusion |
{
"identifier": "ark:\/88434\/mds2-3735",
"accessLevel": "public",
"contactPoint": {
"hasEmail": "mailto:[email protected]",
"fn": "Nik Hrabe"
},
"programCode": [
"006:045"
],
"landingPage": "https:\/\/data.nist.gov\/od\/id\/mds2-3735",
"title": "AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718",
"description": "This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were excised from the same size legs (2.5 mm width) of one original AMB2022-01 specimen (AMB2022-718-AMMT-B7-P4). Excised tensile specimens were quasi-static uniaxially tensile tested according to ASTM E8 (strain rate 1*10-3 sec-1, 3 mm gauge length custom contact extensometer). Calibration data given includes all processing and microstructure data from AMB2022-01 (https:\/\/www.nist.gov\/ambench\/am-bench-2022-challenge-problems-and-measurement-results), including 3D serial sectioning electron backscatter diffraction (EBSD) data (https:\/\/doi.org\/10.18434\/mds2-2767). Material property data such as elastic mechanical properties are not provided.",
"language": [
"en"
],
"distribution": [
{
"accessURL": "https:\/\/doi.org\/10.18434\/mds2-3735",
"description": "This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). As seen in Figure 1, eight continuum-but-miniature tensile specimens were excised from the same size legs (2.5 mm width) of one original AMB2022-01 specimen (AMB2022-718-AMMT-B7-P4). Excised tensile specimens were quasi-static uniaxially tensile tested according to ASTM E8 (strain rate 1*10-3 sec-1, 3 mm gauge length custom contact extensometer). Calibration data given includes all processing and microstructure data from AMB2022-01 (https:\/\/www.nist.gov\/ambench\/am-bench-2022-challenge-problems-and-measurement-results), including 3D serial sectioning electron backscatter diffraction (EBSD) data (https:\/\/doi.org\/10.18434\/mds2-2767). Material property data such as elastic mechanical properties are not provided.",
"title": "AMB2025-02 Macroscale Quasi-Static Tensile Tests of PBF-L IN718"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3735\/readme.pdf",
"mediaType": "application\/pdf",
"title": "readme"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3735\/prediction%20submission%20template.xlsx",
"mediaType": "application\/vnd.openxmlformats-officedocument.spreadsheetml.sheet",
"title": "prediction submission template"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3735\/calibration%20data.zip",
"mediaType": "application\/zip",
"title": "calibration data"
}
],
"bureauCode": [
"006:55"
],
"modified": "2025-02-18 00:00:00",
"publisher": {
"@type": "org:Organization",
"name": "National Institute of Standards and Technology"
},
"theme": [
"Manufacturing:Additive manufacturing",
"Materials:Metals",
"Materials:Materials characterization"
],
"keyword": [
"additive manufacturing",
"3D printing",
"inconel",
"nickel superalloy",
"718",
"powder bed fusion",
"laser powder bed fusion"
]
}
