Data provided by National Oceanic and Atmospheric Administration
In salmon recovery programs it is commonly necessary to chill incubation and early rearing temperatures to match wild development times. The most common failure mode for a chiller system is failure of the chiller or circulating pumps. Following chiller failure, the water temperature can rise from 5-7 C to 10-13 C depending on the well temperatures and ambient air temperatures.
The speed and magnitude of the temperature increases depends on how the chillers are designed. The simplest design is a direct-coupled chiller with chilled gas/process water heat exchanger. Other chiller designs include both chilled glycol and water reservoirs. The addition of these reservoirs serves to reduce the maximum rate of temperature change following chiller failure. Increased deformities have been observed in direct-coupled chiller systems for sockeye salmon following chiller failures.
This model can be used to size glycol and water reservoirs to control the rise in temperature following chiller failure.
About this Dataset
Updated: 2025-04-21
Metadata Last Updated:
2025-04-04T13:32:02.035Z
Date Created:
N/A
Data Provided by:
Dataset Owner:
N/A
| Title | Chiller Design Model - Impact of chiller failure on the short-term temperature variation in the incubation of salmonids |
|---|---|
| Description | In salmon recovery programs it is commonly necessary to chill incubation and early rearing temperatures to match wild development times. The most common failure mode for a chiller system is failure of the chiller or circulating pumps. Following chiller failure, the water temperature can rise from 5-7 C to 10-13 C depending on the well temperatures and ambient air temperatures. The speed and magnitude of the temperature increases depends on how the chillers are designed. The simplest design is a direct-coupled chiller with chilled gas/process water heat exchanger. Other chiller designs include both chilled glycol and water reservoirs. The addition of these reservoirs serves to reduce the maximum rate of temperature change following chiller failure. Increased deformities have been observed in direct-coupled chiller systems for sockeye salmon following chiller failures. This model can be used to size glycol and water reservoirs to control the rise in temperature following chiller failure. |
| Modified | 2025-04-04T13:32:02.035Z |
| Publisher Name | N/A |
| Contact | N/A |
| Keywords | DOC/NOAA/NMFS/NWFSC > Northwest Fisheries Science Center, National Marine Fisheries Service, NOAA. U.S. Department of Commerce , EFS (Environmental and Fisheries Sciences) Division , oceans |
{
"identifier": "gov.noaa.nmfs.inport:30879",
"accessLevel": "public",
"contactPoint": {
"@type": "vcard:Contact",
"fn": "Your contact point",
"hasEmail": "mailto:[email protected]"
},
"programCode": [
"010:000"
],
"landingPage": "",
"title": "Chiller Design Model - Impact of chiller failure on the short-term temperature variation in the incubation of salmonids",
"description": "In salmon recovery programs it is commonly necessary to chill incubation and early rearing temperatures to match wild development times. The most common failure mode for a chiller system is failure of the chiller or circulating pumps. Following chiller failure, the water temperature can rise from 5-7 C to 10-13 C depending on the well temperatures and ambient air temperatures.\n\nThe speed and magnitude of the temperature increases depends on how the chillers are designed. The simplest design is a direct-coupled chiller with chilled gas\/process water heat exchanger. Other chiller designs include both chilled glycol and water reservoirs. The addition of these reservoirs serves to reduce the maximum rate of temperature change following chiller failure. Increased deformities have been observed in direct-coupled chiller systems for sockeye salmon following chiller failures.\nThis model can be used to size glycol and water reservoirs to control the rise in temperature following chiller failure.",
"language": "",
"distribution": [
{
"@type": "dcat:Distribution",
"mediaType": "application\/json",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A30879"
},
{
"@type": "dcat:Distribution",
"mediaType": "text\/html",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A30879\/html"
},
{
"@type": "dcat:Distribution",
"mediaType": "application\/xml",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A30879\/xml"
}
],
"bureauCode": [
"010:04"
],
"modified": "2025-04-04T13:32:02.035Z",
"publisher": {
"@type": "org:Organization",
"name": "Your Publisher"
},
"theme": "",
"keyword": [
"DOC\/NOAA\/NMFS\/NWFSC > Northwest Fisheries Science Center, National Marine Fisheries Service, NOAA. U.S. Department of Commerce",
"EFS (Environmental and Fisheries Sciences) Division",
"oceans"
]
}
