Data associated with the publication:
"Zeeman-resolved Autler-Townes splitting in Rydberg atoms with a tunable RF resonance and a single transition dipole moment"
Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In the corresponding paper, we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light.
Included in this dataset is the data associated with every plot in the paper, separated by figure number, including:
FIgure 2: Measured EIT signals in the presence of a strong
(1.85(1) mT) magnetic field either aligned with or orthogonal
to the polarization axis.
Figure 3: Theoretical EIT signals for Cs in the presence of
a 1.85(1) mT magnetic field for light polarizations aligned
to or orthogonal to the magnetic field.
Figure 4: Measured Autler-Townes splittings in individual mJ
levels via the 58D5/2(mJ = ±5/2) ? 59P3/2(mJ = ±3/2)
transitions of Cs in the presence of 2.78(1) mT.
Figure 5: Measured Autler-Townes splittings on the Cs
58D5/2 ? 59P3/2 transition with and without mJ selectivity
for various RF fields up to 3.08 V/m.
Figure 6: EIT in the presence of a large magnetic field using circularly polarized light.
EIT signals correspond to voltage traces (collected on an oscilloscope) of a balanced photodiode as laser frequencies are scanned. The x axis is converted from a time series of each voltage to a frequency using a reference cell. The scaling is determined by measuring the difference between the EIT peaks corresponding to the D5/2 and D3/2 Rydberg states, and the zero is generally taken to be the location of the D5/2 EIT peak.
About this Dataset
| Title | Data associated with "Zeeman-resolved Autler-Townes splitting in Rydberg atoms with a tunable RF resonance and a single transition dipole moment" |
|---|---|
| Description | Data associated with the publication: "Zeeman-resolved Autler-Townes splitting in Rydberg atoms with a tunable RF resonance and a single transition dipole moment" Applying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In the corresponding paper, we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light. Included in this dataset is the data associated with every plot in the paper, separated by figure number, including: FIgure 2: Measured EIT signals in the presence of a strong (1.85(1) mT) magnetic field either aligned with or orthogonal to the polarization axis. Figure 3: Theoretical EIT signals for Cs in the presence of a 1.85(1) mT magnetic field for light polarizations aligned to or orthogonal to the magnetic field. Figure 4: Measured Autler-Townes splittings in individual mJ levels via the 58D5/2(mJ = ±5/2) ? 59P3/2(mJ = ±3/2) transitions of Cs in the presence of 2.78(1) mT. Figure 5: Measured Autler-Townes splittings on the Cs 58D5/2 ? 59P3/2 transition with and without mJ selectivity for various RF fields up to 3.08 V/m. Figure 6: EIT in the presence of a large magnetic field using circularly polarized light. EIT signals correspond to voltage traces (collected on an oscilloscope) of a balanced photodiode as laser frequencies are scanned. The x axis is converted from a time series of each voltage to a frequency using a reference cell. The scaling is determined by measuring the difference between the EIT peaks corresponding to the D5/2 and D3/2 Rydberg states, and the zero is generally taken to be the location of the D5/2 EIT peak. |
| Modified | 2023-11-12 00:00:00 |
| Publisher Name | National Institute of Standards and Technology |
| Contact | mailto:[email protected] |
| Keywords | spectroscopy , Rydberg , magnetic field , Zeeman , electrometry , quantum sensing , Autler-Townes |
{
"identifier": "ark:\/88434\/mds2-3102",
"accessLevel": "public",
"contactPoint": {
"hasEmail": "mailto:[email protected]",
"fn": "Noah Schlossberger"
},
"programCode": [
"006:045"
],
"landingPage": "https:\/\/data.nist.gov\/od\/id\/mds2-3102",
"title": "Data associated with \"Zeeman-resolved Autler-Townes splitting in Rydberg atoms with a tunable RF resonance and a single transition dipole moment\"",
"description": "Data associated with the publication: \n\"Zeeman-resolved Autler-Townes splitting in Rydberg atoms with a tunable RF resonance and a single transition dipole moment\"\n\nApplying a magnetic field as a method for tuning the frequency of Autler-Townes splitting for Rydberg electrometry has recently been demonstrated. In the corresponding paper, we provide a theoretical understanding of EIT signals in the presence of a large magnetic field, as well as demonstrate some advantages of this technique over traditional Autler-Townes based electrometry. We show that a strong magnetic field provides a well-defined quantization axis regardless of the optical field polarizations, we demonstrate that by separating the $m_J$ levels of the Rydberg state we can perform an Autler-Townes splitting with a single participating dipole moment, and we demonstrate recovery of signal strength by populating a single $m_J$ level using circularly polarized light.\n\nIncluded in this dataset is the data associated with every plot in the paper, separated by figure number, including:\n\nFIgure 2: Measured EIT signals in the presence of a strong\n(1.85(1) mT) magnetic field either aligned with or orthogonal\nto the polarization axis. \n\nFigure 3: Theoretical EIT signals for Cs in the presence of\na 1.85(1) mT magnetic field for light polarizations aligned\nto or orthogonal to the magnetic field.\n\nFigure 4: Measured Autler-Townes splittings in individual mJ\nlevels via the 58D5\/2(mJ = \u00b15\/2) ? 59P3\/2(mJ = \u00b13\/2)\ntransitions of Cs in the presence of 2.78(1) mT.\n\nFigure 5: Measured Autler-Townes splittings on the Cs\n58D5\/2 ? 59P3\/2 transition with and without mJ selectivity\nfor various RF fields up to 3.08 V\/m. \n\nFigure 6: EIT in the presence of a large magnetic field using circularly polarized light.\n\n\nEIT signals correspond to voltage traces (collected on an oscilloscope) of a balanced photodiode as laser frequencies are scanned. The x axis is converted from a time series of each voltage to a frequency using a reference cell. The scaling is determined by measuring the difference between the EIT peaks corresponding to the D5\/2 and D3\/2 Rydberg states, and the zero is generally taken to be the location of the D5\/2 EIT peak.",
"language": [
"en"
],
"distribution": [
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig5b.csv",
"mediaType": "text\/csv",
"title": "Fig5b"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig5c.csv",
"mediaType": "text\/csv",
"title": "Fig5c"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/3102_README.txt",
"mediaType": "text\/plain",
"title": "3102_README"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig5a.csv",
"mediaType": "text\/csv",
"title": "Fig5a"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig3b.csv",
"mediaType": "text\/csv",
"title": "Fig3b"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig3a.csv",
"mediaType": "text\/csv",
"title": "Fig3a"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig3d.csv",
"mediaType": "text\/csv",
"title": "Fig3d"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig5d.csv",
"mediaType": "text\/csv",
"title": "Fig5d"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig4b.csv",
"mediaType": "text\/csv",
"title": "Fig4b"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig4c.csv",
"mediaType": "text\/csv",
"title": "Fig4c"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig4a.csv",
"mediaType": "text\/csv",
"title": "Fig4a"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig6b.csv",
"mediaType": "text\/csv",
"title": "Fig6b"
},
{
"downloadURL": "https:\/\/data.nist.gov\/od\/ds\/mds2-3102\/Fig6a.csv",
"mediaType": "text\/csv",
"title": "Fig6a"
}
],
"bureauCode": [
"006:55"
],
"modified": "2023-11-12 00:00:00",
"publisher": {
"@type": "org:Organization",
"name": "National Institute of Standards and Technology"
},
"theme": [
"Physics:Atomic, molecular, and quantum",
"Physics:Optical physics"
],
"keyword": [
"spectroscopy",
"Rydberg",
"magnetic field",
"Zeeman",
"electrometry",
"quantum sensing",
"Autler-Townes"
]
}