U.S. flag

An official website of the United States government

Dot gov

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Https

Secure .gov websites use HTTPS
A lock () or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Breadcrumb

  1. Home

NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: New Jersey Southern

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr.

This metadata record describes the New Jersey, Southern digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Atlantic, Camden, Cape May, Cumberland, Gloucester, and Salem Counties.

The DEM was produced from the following lidar data sets:
1. 2018 New Jersey South Jersey FEMA
2. 2018 NJ Southern NJ
3. 2015 USGS Delaware Valley
4. 2014 NGS Coastal Mapping Program Topobathy Lidar: Post-Sandy Atlantic Seaboard

The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.

About this Dataset

Updated: 2025-04-21
Metadata Last Updated: 2025-04-04T13:51:18.069Z
Date Created: N/A
Data Provided by:
Dataset Owner: N/A

Access this data

Contact dataset owner Access URL
Table representation of structured data
Title NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: New Jersey Southern
Description These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the New Jersey, Southern digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Atlantic, Camden, Cape May, Cumberland, Gloucester, and Salem Counties. The DEM was produced from the following lidar data sets: 1. 2018 New Jersey South Jersey FEMA 2. 2018 NJ Southern NJ 3. 2015 USGS Delaware Valley 4. 2014 NGS Coastal Mapping Program Topobathy Lidar: Post-Sandy Atlantic Seaboard The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.
Modified 2025-04-04T13:51:18.069Z
Publisher Name N/A
Contact N/A
Keywords EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES > FLOODING , EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS/PROCESSES > COASTAL PROCESSES > SEA LEVEL CHANGES , EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > DIGITAL ELEVATION/TERRAIN MODEL (DEM) , CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > NEW JERSEY , Bathymetry/Topography , DEM , Digital Elevation Model , elevation , flooding , inundation , lidar , sea level rise , topography , Atlantic County , Camden County , Cape May County , Cumberland County , Gloucester County , New Jersey , Salem County , US , DOC/NOAA/NOS/OCM > Office of Coastal Management, National Ocean Service, NOAA, U.S. Department of Commerce , Inundation , elevation
{
    "identifier": "gov.noaa.nmfs.inport:65887",
    "accessLevel": "public",
    "contactPoint": {
        "@type": "vcard:Contact",
        "fn": "Your contact point",
        "hasEmail": "mailto:[email protected]"
    },
    "programCode": [
        "010:000"
    ],
    "landingPage": "",
    "title": "NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: New Jersey Southern",
    "description": "These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https:\/\/coast.noaa.gov\/slr.\n      \n      This metadata record describes the New Jersey, Southern digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Atlantic, Camden, Cape May, Cumberland, Gloucester, and Salem Counties.\n      \n      The DEM was produced from the following lidar data sets:\n      1. 2018 New Jersey South Jersey FEMA\n      2. 2018 NJ Southern NJ\n      3. 2015 USGS Delaware Valley\n      4. 2014 NGS Coastal Mapping Program Topobathy Lidar: Post-Sandy Atlantic Seaboard\n\n      \n      The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.",
    "language": "",
    "distribution": [
        {
            "@type": "dcat:Distribution",
            "mediaType": "application\/json",
            "accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A65887"
        },
        {
            "@type": "dcat:Distribution",
            "mediaType": "text\/html",
            "accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A65887\/html"
        },
        {
            "@type": "dcat:Distribution",
            "mediaType": "application\/xml",
            "accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.nmfs.inport%3A65887\/xml"
        }
    ],
    "bureauCode": [
        "010:04"
    ],
    "modified": "2025-04-04T13:51:18.069Z",
    "publisher": {
        "@type": "org:Organization",
        "name": "Your Publisher"
    },
    "theme": "",
    "keyword": [
        "EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS\/PROCESSES > COASTAL PROCESSES > FLOODING",
        "EARTH SCIENCE > LAND SURFACE > GEOMORPHIC LANDFORMS\/PROCESSES > COASTAL PROCESSES > SEA LEVEL CHANGES",
        "EARTH SCIENCE > LAND SURFACE > TOPOGRAPHY > TERRAIN ELEVATION > DIGITAL ELEVATION\/TERRAIN MODEL (DEM)",
        "CONTINENT > NORTH AMERICA > UNITED STATES OF AMERICA > NEW JERSEY",
        "Bathymetry\/Topography",
        "DEM",
        "Digital Elevation Model",
        "elevation",
        "flooding",
        "inundation",
        "lidar",
        "sea level rise",
        "topography",
        "Atlantic County",
        "Camden County",
        "Cape May County",
        "Cumberland County",
        "Gloucester County",
        "New Jersey",
        "Salem County",
        "US",
        "DOC\/NOAA\/NOS\/OCM > Office of Coastal Management, National Ocean Service, NOAA, U.S. Department of Commerce",
        "Inundation",
        "elevation"
    ]
}