Equipment Used: NOAA Ship Okeanos Explorer is equipped with a 26 kilohertz (kHz) Kongsberg EM 304 MKII multibeam sonar. The multibeam sonar was used to collect seafloor bathymetry, seafloor backscatter, and water column backscatter. Bathymetric and seafloor backscatter data are stored in .kmall files as beam-averaged backscatter values and as full time-series values (snippets) within each beam. Water column backscatter data are stored separately in .kmwcd files.
Real-time surface sound speed values were provided by a RESON SVP 70 sound velocity probe mounted in close proximity to the EM 304 transducer and were monitored in SIS for deviations from the values determined by sound speed casts. Sound speed profiles were collected every six hours or more frequently as dictated by local oceanographic conditions (typically every two hours when operating in more dynamic areas).
Vessel positioning and attitude were measured by Applanix POS MV V5 and Kongsberg Seapath 380 positioning systems during data collection. This redundancy allows for either system to be the primary source of positioning and attitude for the multibeam data in the event that the other system fails. Positioning and attitude data were applied to the multibeam data in real time and were stored in .kmall files. The primary system used is noted in the processing logs.
The Okeanos Explorer is equipped with a Knudsen 3260 sub-bottom profiler with a central frequency of 3.5 kHz. This sonar was used to collect echogram images of shallow geological layers underneath the seafloor to a maximum depth of approximately 80 meters below the seafloor. Phase, range, and gain were monitored and optimized for data collection. New files were created when changes were made to pulse lengths and/or power settings.
Okeanos Explorer is equipped with five Simrad EK80 split-beam sonars operating with wide-band transceivers (WBT) at 18, 38, 70, 120, and 200 kHz. These quantitative scientific echosounders were calibrated to identify the target strength of water column acoustic reflectors (e.g., deep scattering layers, fish, gas bubbles from seeps), providing additional information about water column characteristics and anomalies.
Okeanos Explorer is equipped with two ADCPs, a Teledyne Workhorse Mariner (300 kHz) and a Teledyne Ocean Surveyor (38 kHz). Depending on environmental conditions, the 300 kHz system provides ocean current data to a depth of approximately 70 meters, and the 38 kHz system provides data to a depth of approximately 1,200 meters.
About this Dataset
| Title | EK80 Water Column Sonar Data Collected During EX2604 |
|---|---|
| Description | Equipment Used: NOAA Ship Okeanos Explorer is equipped with a 26 kilohertz (kHz) Kongsberg EM 304 MKII multibeam sonar. The multibeam sonar was used to collect seafloor bathymetry, seafloor backscatter, and water column backscatter. Bathymetric and seafloor backscatter data are stored in .kmall files as beam-averaged backscatter values and as full time-series values (snippets) within each beam. Water column backscatter data are stored separately in .kmwcd files. Real-time surface sound speed values were provided by a RESON SVP 70 sound velocity probe mounted in close proximity to the EM 304 transducer and were monitored in SIS for deviations from the values determined by sound speed casts. Sound speed profiles were collected every six hours or more frequently as dictated by local oceanographic conditions (typically every two hours when operating in more dynamic areas). Vessel positioning and attitude were measured by Applanix POS MV V5 and Kongsberg Seapath 380 positioning systems during data collection. This redundancy allows for either system to be the primary source of positioning and attitude for the multibeam data in the event that the other system fails. Positioning and attitude data were applied to the multibeam data in real time and were stored in .kmall files. The primary system used is noted in the processing logs. The Okeanos Explorer is equipped with a Knudsen 3260 sub-bottom profiler with a central frequency of 3.5 kHz. This sonar was used to collect echogram images of shallow geological layers underneath the seafloor to a maximum depth of approximately 80 meters below the seafloor. Phase, range, and gain were monitored and optimized for data collection. New files were created when changes were made to pulse lengths and/or power settings. Okeanos Explorer is equipped with five Simrad EK80 split-beam sonars operating with wide-band transceivers (WBT) at 18, 38, 70, 120, and 200 kHz. These quantitative scientific echosounders were calibrated to identify the target strength of water column acoustic reflectors (e.g., deep scattering layers, fish, gas bubbles from seeps), providing additional information about water column characteristics and anomalies. Okeanos Explorer is equipped with two ADCPs, a Teledyne Workhorse Mariner (300 kHz) and a Teledyne Ocean Surveyor (38 kHz). Depending on environmental conditions, the 300 kHz system provides ocean current data to a depth of approximately 70 meters, and the 38 kHz system provides data to a depth of approximately 1,200 meters. |
| Modified | 2026-11-04T08:49:42.808Z |
| Publisher Name | N/A |
| Contact | N/A |
| Keywords | Earth Science > Oceans > Ocean Acoustics > Acoustic Scattering , Earth Science > Oceans > Aquatic Sciences > Fisheries , Earth Science > Oceans > Ocean Acoustics , Earth Science > Biosphere > Ecosystems > Marine Ecosystems > Pelagic , Earth Science > Biosphere > Ecosystems > Marine Ecosystems , Earth Science > Biosphere > Ecosystems > Marine Ecosystems > Benthic , Earth Science > Biosphere > Ecosystems > Aquatic Ecosystems , Earth Science > Oceans > Bathymetry/Seafloor Topography > Bathymetry , Earth Science > Oceans > Bathymetry/Seafloor Topography > Seafloor Topography , South Pacific Ocean , DOC/NOAA/NESDIS/NCEI > National Centers for Environmental Information, NESDIS, NOAA, U.S. Department of Commerce , DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce , Vertical Location > Water Column , In Situ/Laboratory Instruments > Profilers/Sounders > Acoustic Sounders > WCMS > Water Column Mapping System , oceans , geoscientificInformation |
{
"identifier": "gov.noaa.ncei:EX2604_EK80",
"accessLevel": "public",
"contactPoint": {
"@type": "vcard:Contact",
"fn": "Your contact point",
"hasEmail": "mailto:[email protected]"
},
"programCode": [
"010:000"
],
"landingPage": "",
"title": "EK80 Water Column Sonar Data Collected During EX2604",
"description": "Equipment Used: NOAA Ship Okeanos Explorer is equipped with a 26 kilohertz (kHz) Kongsberg EM 304 MKII multibeam sonar. The multibeam sonar was used to collect seafloor bathymetry, seafloor backscatter, and water column backscatter. Bathymetric and seafloor backscatter data are stored in .kmall files as beam-averaged backscatter values and as full time-series values (snippets) within each beam. Water column backscatter data are stored separately in .kmwcd files.\nReal-time surface sound speed values were provided by a RESON SVP 70 sound velocity probe mounted in close proximity to the EM 304 transducer and were monitored in SIS for deviations from the values determined by sound speed casts. Sound speed profiles were collected every six hours or more frequently as dictated by local oceanographic conditions (typically every two hours when operating in more dynamic areas). \nVessel positioning and attitude were measured by Applanix POS MV V5 and Kongsberg Seapath 380 positioning systems during data collection. This redundancy allows for either system to be the primary source of positioning and attitude for the multibeam data in the event that the other system fails. Positioning and attitude data were applied to the multibeam data in real time and were stored in .kmall files. The primary system used is noted in the processing logs. \nThe Okeanos Explorer is equipped with a Knudsen 3260 sub-bottom profiler with a central frequency of 3.5 kHz. This sonar was used to collect echogram images of shallow geological layers underneath the seafloor to a maximum depth of approximately 80 meters below the seafloor. Phase, range, and gain were monitored and optimized for data collection. New files were created when changes were made to pulse lengths and\/or power settings. \nOkeanos Explorer is equipped with five Simrad EK80 split-beam sonars operating with wide-band transceivers (WBT) at 18, 38, 70, 120, and 200 kHz. These quantitative scientific echosounders were calibrated to identify the target strength of water column acoustic reflectors (e.g., deep scattering layers, fish, gas bubbles from seeps), providing additional information about water column characteristics and anomalies.\nOkeanos Explorer is equipped with two ADCPs, a Teledyne Workhorse Mariner (300 kHz) and a Teledyne Ocean Surveyor (38 kHz). Depending on environmental conditions, the 300 kHz system provides ocean current data to a depth of approximately 70 meters, and the 38 kHz system provides data to a depth of approximately 1,200 meters.",
"language": "",
"distribution": [
{
"@type": "dcat:Distribution",
"mediaType": "application\/json",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.ncei%3AEX2604_EK80"
},
{
"@type": "dcat:Distribution",
"mediaType": "text\/html",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.ncei%3AEX2604_EK80\/html"
},
{
"@type": "dcat:Distribution",
"mediaType": "application\/xml",
"accessURL": "https:\/\/www.ncei.noaa.gov\/metadata\/geoportal\/\/rest\/metadata\/item\/gov.noaa.ncei%3AEX2604_EK80\/xml"
}
],
"bureauCode": [
"010:04"
],
"modified": "2026-11-04T08:49:42.808Z",
"publisher": {
"@type": "org:Organization",
"name": "Your Publisher"
},
"theme": "",
"keyword": [
"Earth Science > Oceans > Ocean Acoustics > Acoustic Scattering",
"Earth Science > Oceans > Aquatic Sciences > Fisheries",
"Earth Science > Oceans > Ocean Acoustics",
"Earth Science > Biosphere > Ecosystems > Marine Ecosystems > Pelagic",
"Earth Science > Biosphere > Ecosystems > Marine Ecosystems",
"Earth Science > Biosphere > Ecosystems > Marine Ecosystems > Benthic",
"Earth Science > Biosphere > Ecosystems > Aquatic Ecosystems",
"Earth Science > Oceans > Bathymetry\/Seafloor Topography > Bathymetry",
"Earth Science > Oceans > Bathymetry\/Seafloor Topography > Seafloor Topography",
"South Pacific Ocean",
"DOC\/NOAA\/NESDIS\/NCEI > National Centers for Environmental Information, NESDIS, NOAA, U.S. Department of Commerce",
"DOC\/NOAA\/NESDIS\/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce",
"Vertical Location > Water Column",
"In Situ\/Laboratory Instruments > Profilers\/Sounders > Acoustic Sounders > WCMS > Water Column Mapping System",
"oceans",
"geoscientificInformation"
]
}