SRM 3672 Organic Contaminants in Smokers' Urine (Frozen) - This Standard Reference Material (SRM) is intended for use in evaluating analytical methods for the determination of selected hydroxylated polycyclic aromatic hydrocarbons (hydroxylated PAHs) and phthalate, phenol, and volatile organic compound (VOC) metabolites in urine. All of the constituents for which certified and reference values are provided are naturally present in the urine. This data is public in the Certificate of Analysis for this material.

SRM 3673 Organic Contaminants in Non-Smokers' Urine (Frozen) - This Standard Reference Material (SRM) is intended for use in evaluating analytical methods for the determination of selected hydroxylated polycyclic aromatic hydrocarbons (hydroxylated PAHs) and phthalate, phenol, and volatile organic compound (VOC) metabolites in urine. All of the constituents for which certified and reference values are provided are naturally present in the urine. This data is public in the Certificate of Analysis for this material.

Standard Reference Material 695 Trace Elements in Multi-Nutrient Fertilizer - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques employed in the analysis of multi-nutrient fertilizer materials and materials of a similar matrix. A unit of SRM 695 consists of approximately 70 g of jet-milled fertilizer. This data is public in the Certificate of Analysis for this material.

Standard Reference Material-1721: Southern Oceanic Air. Ambient Nominal Amount of Substance Fraction for Carbon Dioxide, Methane & Nitrous Oxide. This Standard Reference Material (SRM) is a primary gas mixture for which the amount-of-substance fraction, expressed as concentration, may be related to secondary working standards. This SRM is intended for the calibration of instruments used for ambient carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) determinations and for other applications. This data is public in the Certificate of Analysis for this material.

This folder contains image data sets from 14 separate serial sectioning sessions. The entire data folder consists of 1379 8 bit tif images and is 47.3 GB in size. Serial sectioning was performed using FEI Helios 660 NanoLab focused ion beam scanning electron microscope (FIB SEM) and Auto Slice and View G3 software. The sample was a heavy metal stained and resin embedded Caenorhabditis elegans (C. elegans) that were exposed to 60 nm Au nanoparticles. Detailed descriptions of the worm preparation and resin block processing are described in Johnson, M.E. et al. (ACS Nano, 2016).

A comparison of the expanded uncertainty for certified values of iodine in food matrix CRMs. The CRMS were found by searching The European Virtual Institute for Speciation Analysis (EVISA) database using the terms "Iodine" and "Certified" in the Material category. The uncertainties are expanded uncertainties at approximately 95% confidence.

This dataset contains thermographic measurements acquired during single and multiple track scans on bare substrates and on single layers of powder. The substrates and powder are nickel alloy 625 and the experiments are performed inside a commercial laser powder bed fusion machine. There are four experiment cases: 1) a single scan track on a bare substrate, 2) a single scan track on a single hand-spread layer of powder, 3) multiple (39) scan tracks covering an area on a bare substrate, and 4) multiple (39) scan tracks solidifying a single hand-spread layer of powder.

The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series, with two initial goals: 1) to allow modelers to test their simulations against rigorous, highly controlled additive manufacturing benchmark test data, and 2) to encourage additive manufacturing practitioners to develop novel mitigation strategies for challenging build scenarios.

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and cooling rate challenge (CHAL-AMB2018-02-CR).

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of a continuing series of controlled benchmark tests, in conjunction with a conference series, with two initial goals, 1) to allow modelers of Additive Manufacturing processes to test their simulations against rigorous, highly controlled additive manufacturing benchmark test data, and 2) to encourage additive manufacturing practitioners to develop novel mitigation strategies for challenging build scenarios.