These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ-820G system. The data were acquired from 201410- 201505 in fifty three missions along the coastline of Puerto Rico. The project consists of 525 square miles along the shores of Puerto Rico. This dataset contains 5721 - 500 m x 500 m lidar tiles.

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ820G system. The data were acquired from 20140717 - 20140809 in twenty two missions.

LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data as well
as intensity data. LiDAR data was processed to achieve a bare ground surface, and was delivered in LAS format. Classified LAS
data was also used as a base for collection of hydro features, delivered in MicroStation v8 format. The dates of collection are:
1. JASPER COUNTY (full county): 20061227 to 20070216
2. COLLETON COUNTY (full county: 20070216 to 20070323
3. CHARLESTON COUNTY (Partial County): 20070222 to 20070223

This data set is comprised of lidar point cloud data. This project required lidar data to be acquired over Horry County, South Carolina. The total area of the Horry County Elevation Data and Imagery AOI is approximately 1092 square miles. Lidar data was collected and processed to meet the requirements of the project task order. The lidar collection was a collaborative effort between two data acquisition firms.

This Light Detection and Ranging (LiDAR) dataset is a survey of northern San Francisco Bay, California. The project area consists of
approximately 437 square miles in portions of seven California counties: Alameda, Contra Costa, Marin, Napa, San Francisco, Solano, and
Sonoma. The project design of the LiDAR data acquisition was developed to support a nominal post spacing of 1 meter. Fugro EarthData, Inc.
acquired 147 flight lines in nine lifts on February 25, 26, and 28; March 1, 24, and 26; and April 3, 15, and 16, 2010. The data was

This data represents a LiDAR (Light Detection & Ranging) gridded bathymetric surface and a gridded relative seafloor reflectivity surface (incorporated into the las format as intensity) for an area of shallow seabed:
1. Surrounding St. Thomas and St. John (STT/STJ): 3m x 3m grid
2. Mouth of Salt River Bay (SARI) in St. Croix: 5m x 5m grid
3. Buck Island Reef National Monument (BUIS) in St. Croix: 3m x 3m grid

The United States Virgin Islands Topographic LiDAR project collected topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the islands of St. Thomas, St. John, St. Croix and numerous smaller islands and islets in the United States Virgin Islands. The islands of St. Thomas and St. John were acquired between November 9, 2013 and November 19, 2013. The island of St. Croix was acquired between November 27, 2013 and December 10, 2013.

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ820G system. The data were acquired from 20141012 - 20141026.

NOAA contracted with Spencer B. Gross, Inc. (SBG) to obtain airborne Lidar of Willapa Bay, Washington during low tide
conditions. The Lidar data was processed to deliver topographic surface elevation data of the exposed intertidal flats and surrounding
terrestrial areas.

Original contact information:
Contact Org: NOAA Office for Coastal Management
Phone: 843-740-1202
Email: [email protected]

Towill collected approximately 75 square miles of coast in Oregon, 486 square miles of coast in Washington and California, and an additional 44 square miles for USACE defined harbors. The data was collected in a corridor approximately 500 meters wide. The nominal pulse spacing for this project was 1 point every 0.35 meters.