These data from the laboratory tests of a prototype residential liquid-to-air ground-source air conditioner (GSAC) using CO2 as the refrigerant. The data collection and processing methods are described in detail in this report:

Report Title: "Laboratory Tests of a Prototype Carbon Dioxide Ground-Source Air Conditioner", NIST Technical Note 2068
Publication Date: October 2019
DOI: https://doi.org/10.6028/NIST.TN.2068
Authors: Harrison Skye, Wei Wu

Thermal conductivity data acquired previously for the establishment of Standard Reference Material (SRM) 1450, Fibrous Glass Board, as well as subsequent renewals 1450a, 1450b, 1450c, and 1450d, are re-analyzed collectively and as individual data sets. Additional data sets for proto-1450 material lots are also included in the analysis (eleven data sets in total).

Data files for the publication "High Accuracy Near-infrared Carbon Dioxide Intensity Measurements to Support Remote Sensing" in Geophysical Research Letters

SRM 1450e Fibrous Glass Board - This Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials. SRM 1450e is a high-density fibrous glass board certified for bulk density and thermal conductivity. The SRM can be used in conjunction with ASTM C177 or ASTM C518. A unit of SRM 1450e consists of a square panel of fibrous glass and phenolic binder molded into a semi-rigid board.

This is a file containing aggregation data for two proteins that were thermomechanically aggregated. The aggregated proteins were separated by asymmetric flow field flow fractionation and separated protein fractions were detected and quantified by UV spectrophotometry and multi-angle light scattering. The UV spectrophotometry was used to quantify the amount of residual monomer, which is reported herein. The multi-angle light scattering was fitted to a relevant model to calculate the molecular weight of the aggregated protein, also reported herein.

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of tungsten. A unit of SRM 3163 consists of 50 mL of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of tungsten in a high-density polyethylene bottle sealed in an aluminized bag.

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of iodide. A unit of SRM 3180 consists of five 5 mL, sealed, amber, borosilicate glass ampoules of solution prepared gravimetrically to contain a known mass fraction of iodide. The matrix of the solution is water containing sodium sulfite at a concentration of approximately 0.01 mol/L and sodium hydroxide at a concentration of approximately 0.005 mol/L. This data is public in the Certificate of Analysis for this material.

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of sulfate using anion ion chromatography (IC) or other methods. A unit of SRM 3181 consists of five 10 mL sealed borosilicate glass ampoules of solution prepared gravimetrically to contain a known mass fraction of sulfate dissolved in filtered (0.22 ?m) water having a minimum resistivity of 18 megaohm centimeters. This data is public in the Certificate of Analysis for this material.

This Standard Reference Material (SRM) is intended as a primary standard for the quantitative determination of chloride using anion ion chromatography (IC) or other methods. A unit of SRM 3182 consists of five 10 mL sealed borosilicate glass ampoules of solution. The solution is prepared gravimetrically to contain a known mass fraction of chloride dissolved in filtered (0.22 µm) water having a minimum resistivity of 18 megaohm centimeters. This data is public in the Certificate of Analysis for this material.

This Standard Reference Material (SRM) is intended as a primary calibration standard for the quantitative determination of fluoride using anion ion chromatography (IC) or other methods. A unit of SRM 3183 consists of 50 mL of solution in a high density polyethylene bottle sealed in an aluminized bag. The solution is prepared gravimetrically to contain a known mass fraction of fluoride dissolved in filtered (0.22 µm) water having a minimum resistivity of 18 megaohm centimeters. This data is public in the Certificate of Analysis for this material.