This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy 6061-T6using the NIST pulse-heated Kolsky Bar at strain rates between 2400 1/s and 2700 1/s and initialtemperatures from 23 °C to 527 °C and heating times ranging between 0.2 s and 3.5 s. At this time,the thermal history of the specimen during heating is not included in the dataset but this informationmay be included in a future update.

Materials discovery and development necessarily begins with the preparation and identification of product phase(s). Crystalline compounds can be identified by their characteristic diffraction patterns using X-rays, neutrons, and or electrons. An estimated 20,000 X-ray diffractometers and a comparable number of electron microscopes are used daily in materials research and development laboratories for this purpose.

The Micronutrients Measurement Quality Assurance Program (MMQAP) was coordinated by the Chemical Sciences Division and supported measurement technology for selected fat- and water-soluble vitamins and carotenoids in human serum. This program was initiated in 1984 by the National Cancer Institute Division of Cancer Prevention and Control to ensure the long-term reliability of the measurements made while studying the possible cancer chemoprevention roles of these compounds.

A comparison of the expanded uncertainty for certified values of iodine in food matrix CRMs. The CRMS were found by searching The European Virtual Institute for Speciation Analysis (EVISA) database using the terms "Iodine" and "Certified" in the Material category. The uncertainties are expanded uncertainties at approximately 95% confidence.

A method for the identification and determination of arsenosugars in the extract of kelp

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of tellurium. A unit of SRM 3156 consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of tellurium. The solution contains hydrochloric acid at a volume fraction of approximately 10 %, which is equivalent to an amount of substance concentration (molarity) of approximately 1.2 mol/L. This data is public in the Certificate of Analysis for this material.

SRM 3239 Isoflavones Calibration Solution - This Standard Reference Material (SRM) is intended primarily for use in calibration of instruments and techniques used for the determination of isoflavones. SRM 3239 consists of two solutions containing isoflavones at levels that reflect the mass fraction ratios found in soy products. This data is public in the Certificate of Analysis for this material.

This Standard Reference Material (SRM) is intended for use as an analytical standard of known potassium (K) and chloride (Cl-) content. This lot of potassium chloride (KCl) was prepared to ensure a material of high purity and homogeneity and has been assayed after drying at 500 °C. A unit of SRM 999c consists of a single glass bottle containing 30 g of the material. This data is public in the Certificate of Analysis for this material.

SRM 2193a Calcium Carbonate pH Standard [used as saturated Ca(OH)2 solution] - This Standard Reference Material (SRM) is intended for use in preparing solutions for calibrating electrodes for pH measuring systems at pH values above 11.0. This lot of calcium carbonate (CaCO3) was selected for its low level of alkali metal impurities. However, this SRM is certified ONLY as a pH standard, NOT as a pure substance. A unit of SRM 2193a consists of 30 g of CaCO3. This data is public in the Certificate of Analysis for this material.

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of barium. A unit of SRM 3104a consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of barium. The solution contains nitric acid at a volume fraction of approximately 1 %, which is equivalent to a concentration (molarity) of approximately 0.16 mol/L. This data is public in the Certificate of Analysis for this material.