Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground at 47 sites representing different soil types in the United States. Following the passage of the 2004 Pipeline Safety Improvement Act, the Department of Transportation's Office of Pipeline Safety requested that NIST review and reanalyze the data from the NBS study using modern statistical analysis tools. For this analysis, NIST compiled an updated database from the data in the publications by K. H. Logan (i.e.

The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered from the buildings to provide stress-strain models to analyze the impact, fires, and resulting collapse. Those tests represent a large additional data set that can be used for modeling the response of steel structures to fire.

Standard Reference Material-1721: Southern Oceanic Air. Ambient Nominal Amount of Substance Fraction for Carbon Dioxide, Methane & Nitrous Oxide. This Standard Reference Material (SRM) is a primary gas mixture for which the amount-of-substance fraction, expressed as concentration, may be related to secondary working standards. This SRM is intended for the calibration of instruments used for ambient carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) determinations and for other applications. This data is public in the Certificate of Analysis for this material.

SRM 1632e Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix.

This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. Similar material for use in spectrometric methods of analysis is available as SRM 1297. This data is public in the Certificate of Analysis for this material.

SRM 1297 Stainless Steel (SAE 201) - 'This Standard Reference Material (SRM) is intended for use in optical emission and x-ray spectrometric methods of analysis. It is in the form of a disk approximately 32 mm in diameter and 19 mm thick. This data is public in the Certificate of Analysis for this material.

Standard Reference Material 1632d Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1632d consists of 50 g of bituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

SRM 1633c Trace Elements in Coal Fly Ash - This Standard Reference Material (SRM) is intended for use in the evaluation of analytical methods for the determination of constituent elements in coal fly ash or materials of a similar matrix. SRM 1633c is a bituminous coal fly ash that was sieved through a nominal sieve opening of 74 µm (200 mesh) and then blended to assure homogeneity. A unit of SRM 1633c consists of 75 g of powdered material. This data is public in the Certificate of Analysis for this material.

SRM 1635a Trace Elements in Coal (Subbituminous) - This Standard Reference Material (SRM) is intended primarily for the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1635a consists of 50 g of subbituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

Standard Reference Material 2682c Subbituminous Coal (Nominal Mass Fraction 0.5 % Sulfur) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 2682c consists of 50 g of subbituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, packaged in an amber glass bottle under an argon atmosphere, and then sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.