SRM 2452 Hydrogen in Titanium (Nominal Mass Fraction 60 mg/kg) - This Standard Reference Material (SRM) is intended for use in the evaluation of methods and the calibration of equipment used in the determination of hydrogen in titanium alloy. SRM 2452 consists of one bottle containing 10 g of titanium alloy chips. This data is public in the Certificate of Analysis for this material.

Standard Reference Material 131h Refined Cast Iron - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis. It can be used to validate value assignment of in-house reference materials and, if necessary, to calibrate carbon/sulfur analyzers. A unit of SRM 131h consists of a bottle containing 100 g of chips. This data is public in the Certificate of Analysis for this material.

This software provides a framework to generate events with both application payload identification and timestamps. Events information is logged at each producer and consumer. The logs can be used to derive latency and reliability metrics for cyber-physical systems experiments in which wireless communication is used for messaging.

A method was developed to reduce the point-based registration error by restoring the rigid body condition (RRBC method). Registration is the process of transforming one coordinate frame to another coordinate frame. The coordinate frame from which points are transformed is called the working frame and the coordinate frame to which points are transformed is called the destination frame. The RRBC method can be used to reduce the uncertainty of a hole location and thus, improve the success rate for insertion tasks.

In this study, a rail of a linear axis testbed was intentionally degraded to various levels, affecting the carriage motion, which can be deduced with either an inertial measurement unit (IMU) or a laser-based reference system. The rail was degraded over a 10-cm-long region. Thus, the two trucks that move on the rail interact with this region of the rail, changing the translational and angular error motions of the carriage. To mechanically simulate spalling, a handheld grinder was used to wear the surface of the raceway groove of the rail.

Wireless technology is a key enabler of the vision of the future factory work-cell. Such work-cell will operate autonomously with a high degree of mobility enabled by wireless technology. This model describes the work-cell using the Systems Modeling Language (SysML). Using SysML the structural and parametric characteristics of the work-cell are described. Our model provides the architectural components and performance constraints of the work-cell in which wireless is used for a significant portion of connectivity. It identifies the structural components, interfaces, and data flows.

The dataset contains both the robot's high-level tool center position (TCP) health data and controller-level components' information (i.e., joint positions, velocities, currents, temperatures, currents). The datasets can be used by users (e.g., software developers, data scientists) who work on robot health management (including accuracy) but have limited or no access to robots that can capture real data. The datasets can support the:

Materials discovery and development necessarily begins with the preparation and identification of product phase(s). Crystalline compounds can be identified by their characteristic diffraction patterns using X-rays, neutrons, and or electrons. An estimated 20,000 X-ray diffractometers and a comparable number of electron microscopes are used daily in materials research and development laboratories for this purpose.

This data set is captured from a robot workcell that is performing activities representative of several manufacturing operations. The workcell contains two, 6-degree-of-freedom robot manipulators where one robot is performing material handling operations (e.g., transport parts into and out of a specific work space) while the other robot is performing a simulated precision operation (e.g., the robot touching the center of a part with a tool tip that leaves a mark on the part). This precision operation is intended to represent a precise manufacturing operation (e.g., welding, machining).

This tool is used to implement Monte Carlo analysis, which uses probabilistic sensitivity analysis to account for uncertainty. This tool is developed to follow the simulation segment of ASTM E1369. This technique involves a method of model sampling. Specification involves defining which variables are to be simulated, the distribution of each of these variables, and the number of iterations performed. The software then randomly samples from the probabilities for each input variable of interest. Three common distributions that are used include triangular, normal, and uniform.