Search results
60 results found
Data provided by
National Institute of Standards and Technology
Wireless technology is a key enabler of the vision of the future factory work-cell. Such work-cell will operate autonomously with a high degree of mobility enabled by wireless technology. This model describes the work-cell using the Systems Modeling Language (SysML). Using SysML the structural and parametric characteristics of the work-cell are described. Our model provides the architectural components and performance constraints of the work-cell in which wireless is used for a significant portion of connectivity. It identifies the structural components, interfaces, and data flows.
Tags: industrial wireless,industrial communication,wireless sensor networks,factory communication,industrial control,manufacturing,cyber-physical systems,SysML,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
The dataset contains both the robot's high-level tool center position (TCP) health data and controller-level components' information (i.e., joint positions, velocities, currents, temperatures, currents). The datasets can be used by users (e.g., software developers, data scientists) who work on robot health management (including accuracy) but have limited or no access to robots that can capture real data.
Tags: manufacturing,Robotics in manufacturing,Sensing and perception,accuracy degradation,PHM,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
This tool is used to implement Monte Carlo analysis, which uses probabilistic sensitivity analysis to account for uncertainty. This tool is developed to follow the simulation segment of ASTM E1369. This technique involves a method of model sampling. Specification involves defining which variables are to be simulated, the distribution of each of these variables, and the number of iterations performed. The software then randomly samples from the probabilities for each input variable of interest.
Tags: monte carlo,simulation,manufacturing,cost,economics,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
The Manufacturing Cost Guide is a tool that estimates the costs that US manufacturers face and can be used to help gauge the potential returns on manufacturing industry research projects through cost reductions. These costs are grouped into various standardized categories such as the North American Industry Classification System (NAICS) and the Standard Occupational Classification (SOC) system along with other non-standardized costs.
The tool can be used to answer questions such as:
-An organization is conducting research to reduce redundant engineering labor.
Tags: manufacturing,cost,input output,economics,labor,maintenance,Energy,value added,supply chain,environmental impact,environmental sustainability,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
The QIF PMI Report (QPR) software generates a spreadsheet from a QIF (Quality Information Framework) file containing Product and Manufacturing Information (PMI). QIF is a unified XML framework standard for computer-aided quality QIF systems, available free to all implementers. QIF enables the capture, use, and re-use of metrology-related information throughout the Product Lifecycle Management (PLM) and Product Data Management (PDM) domains. QIF was created by the Digital Metrology Standards Consortium.
Tags: manufacturing,QIF,PMI,interoperability,quality,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
This dataset includes the position data of a two-dimensional gantry system experiment in which the G-code commands for the gantry were transmitted through a wireless communications link. The testbed is composed of four main components related to the operation of the gantry system. These components are the gantry system, the Wi-Fi network, the RF channel emulator, and the supervisory computer. In the experimental study, we run a scenario in which the gantry tool moves sequentially between four positions and has a preset dwell at each of the positions.
Tags: wireless,manufacturing,cyber-physical systems,robotics,gantry,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
Materials discovery and development necessarily begins with the preparation and identification of product phase(s). Crystalline compounds can be identified by their characteristic diffraction patterns using X-rays, neutrons, and or electrons. An estimated 20,000 X-ray diffractometers and a comparable number of electron microscopes are used daily in materials research and development laboratories for this purpose.
Tags: chemical structures,crystallography,crystal structures,diffraction,disorder,electrons,identification,inorganic,neutrons,magnetic,metals,minerals,materials,Rietveld,synchrotron,twinned,x-rays,Advanced Materials,manufacturing,Safety,Security and Forensics,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
The NIST/ARPA-E Database of Novel and Emerging Adsorbent Materials is a free, web-based catalog of adsorbent materials and measured adsorption properties of numerous materials obtained from article entries from the scientific literature. Search fields for the database include adsorbent material, adsorbate gas, experimental conditions (pressure, temperature), and bibliographic information (author, title, journal), and results from queries are provided as a list of articles matching the search parameters.
Tags: adsorbate,adsorbent,adsorption,isotherm,metal organic Framework,porous Material,surface science,Advanced Materials,Energy,Environment and Climate,manufacturing,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
NIST has created a Test System to measure conformance of Computer-Aided Design (CAD) software to American Society of Mechanical Engineers (ASME) standards for Product and Manufacturing Information (PMI), specifically geometric dimensioning and tolerancing (GD&T) information. The test system includes: test case definitions (2D CAD drawings with PMI), CAD models generated from the test cases, STEP files generated from the CAD models, and verification and validation reports.
Tags: manufacturing,CAD,PMI,interoperability,data exchange,
Modified: 2022-07-29
Views: 0
Data provided by
National Institute of Standards and Technology
Radio Frequency Measurements for Selected Manufacturing and Industrial Environments using a PN Code Sounding methodology. The resulting measurements include complex impulse responses and spectrum analysis traces. Complex impulse responses were validated using both ray tracing and an outdoor two-ray reference facility. This data is meant to serve as a reference of how radio waves at 2.4 GHz and 5 GHz propagate in industrial environments.
Tags: wireless,manufacturing,propagation,
Modified: 2022-07-29
Views: 0
