These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and cooling rate challenge (CHAL-AMB2018-02-CR).

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of a continuing series of controlled benchmark tests, in conjunction with a conference series, with two initial goals, 1) to allow modelers of Additive Manufacturing processes to test their simulations against rigorous, highly controlled additive manufacturing benchmark test data, and 2) to encourage additive manufacturing practitioners to develop novel mitigation strategies for challenging build scenarios.

This dataset provides surface height data from nickel super alloy 625 experiment samples built through laser powder bed fusion additive manufacturing. The experiment methodically varied part position and orientation relative to the build plate and recoater blade and details of the experiment and dataset are available in a Journal of Research at NIST article.

SolidWorks Part file (CAD file) for a CoCr "lattice" structure additively manufactured in a laser bed powder fusion (LPBF) system at NIST.

This MEMS Calculator determines the following thin film properties from data taken with an optical interferometer or comparable instrument: a) residual strain from fixed-fixed beams, b) strain gradient from cantilevers, c) step heights or thicknesses from step-height test structures, and d) in-plane lengths or deflections. Then, residual stress and stress gradient calculations can be made after an optical vibrometer or comparable instrument is used to obtain Young's modulus from resonating cantilevers or fixed-fixed beams.

Standard Reference Material 131h Refined Cast Iron - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis. It can be used to validate value assignment of in-house reference materials and, if necessary, to calibrate carbon/sulfur analyzers. A unit of SRM 131h consists of a bottle containing 100 g of chips. This data is public in the Certificate of Analysis for this material.

Standard Reference Material 1632d Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1632d consists of 50 g of bituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

SRM 1632e Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix.

SRM 1633c Trace Elements in Coal Fly Ash - This Standard Reference Material (SRM) is intended for use in the evaluation of analytical methods for the determination of constituent elements in coal fly ash or materials of a similar matrix. SRM 1633c is a bituminous coal fly ash that was sieved through a nominal sieve opening of 74 µm (200 mesh) and then blended to assure homogeneity. A unit of SRM 1633c consists of 75 g of powdered material. This data is public in the Certificate of Analysis for this material.

SRM 1635a Trace Elements in Coal (Subbituminous) - This Standard Reference Material (SRM) is intended primarily for the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1635a consists of 50 g of subbituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.