Raw data, software, standard operating procedure, and computer aided design files for the NIST-led publication "Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization II: Towards a Standardized Method"This record contains numerous supporting documents and data for "Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization II: Towards a Standardized Method".In the main .zip file, there are three subfolders and one document.The document is the Standard Operating Procedure (SOP) that was distributed to participants in t

This publicly available dataset encompasses high pressure heat treatment development for laser powder bed fusion (PBF-L) Ti-6Al-4V. In order to understand microstructure as it influences processing-structure-properties-performance relationships, this dataset was acquired with the aim to isolate microstructure as a variable. To accomplish this, identical blocks of Ti-6Al-4V were additively manufactured via PBF-L and were separated into separate groups of for various heat treatments.

In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and videos of the printing process during extrusion of single filaments, pairs of filaments, and triplets of filaments. The link to the GitHub release goes to the state of the code when the paper was submitted. From there, you can also access the current state of the code.

These images, videos, and tables show experimental data, where single lines, pairs of lines, and trios of lines of viscoelastic silicone inks were extruded into moving viscoelastic support baths. Lines were printed at varying angles relative to the camera, such that videos and images captured the side of horizontal lines, cross-sections of horizontal lines, and the side of vertical lines. For single lines and pairs of lines, the filaments were also disturbed after printing by running the nozzle next to the construct.

This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different studies. The IN718 parts were manufactured by laser powder bed fusion using a range of laser energy densities (manipulation of processing variables) and orientations with respect to the build direction. The influence of processing variables on resulting grain structures, pore structures, and mechanical properties were studied in the as-built (not heat treated) condition.

Contains associated data for the manuscript "Layered Security Guidance for Data Asset Management in Additive Manufacturing" by Fahad Milaat and Joshua Lubell. The associated data is the source of the OSCAL representations in Section 4 of the manuscript.

This resource is the implementation in XML Schema [1] of a data model that describes the Additive Manufacturing Benchmark 2022 series data. It provides a robust set of metadata for the build processes and their resulting specimens and for measurements made on these in the context of the AM Bench 2022 project.The schema was designed to support typical science questions which users of a database with metadata about the AM Bench results might wish to pose.

The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate modeling of these strains and stresses is broadly recognized as an effective tool for mitigating these challenges, but rigorous validation data are needed. This data publication includes measurement data from diffraction-based characterizations of residual elastic strains in as-built (not heat treated) artifacts manufactured as part the the 2018 Additive Manufacturing Benchmark Series (AM Bench).

Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a particular concern. This work measures as-built L-PBF surfaces with X-ray computed tomography, and uses rotating beam fatigue (RBF) testing to measure high cycle fatigue life. Surfaces with different, but consistent, characteristics are achieved by build in vertical specimens and changing only the number of contour passes.

The following data files include microstructure measurement results associated with the 2022 Additive Manufacturing Benchmark test series (AM Bench 2022) AMB2022-03 set of benchmarks. These AMB2022-03 benchmarks explore a range of individual and overlapping melt pool behaviors using individual laser tracks and 2D arrays of laser tracks (pads) on solid metal IN718 plates. For the individual laser tracks, a range of laser parameters was used, with variations in laser power, speed, and spot diameter.