The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and the Xray images acquired at the same time, along with timing data for synchronization. Also included is information about the experimental configuration including applied laser power, laser beam spatial profile, and the experimental setup. A text document is included that describes all files.

This report describes the test equipment, process, analysis, and data file formats for the Numisheet 2020 tensile and tension/compression testing of the four materials associated with the Numisheet 2020 conference benchmarks. The four materials include two steel alloys, DP980 for Benchmark 1 and DP1180 for Benchmark 2, and two 6000 series aluminum alloys, AA6xxx-T4 for Benchmark 1 and AA6xxx-T81 for Benchmark 2, that will be referred to here as BM1-DP980, BM2-DP1180, BM1-6xxx-T4, and BM2-6xxx-T81, respectively.

This dataset includes a Microsoft Excel spreadsheet (*.xlsx file) provided as supplemental material for the NIST Technical Note (TN-2099) publication titled "Quasi-Static Position Calibration of the Galvanometer Scanner on the Additive Manufacturing Metrology Testbed". The file contains two tabs, titled "Pre-Compensation" and "Post-Compensation", which provides example measurement data and calculations pertaining to the calibration procedures described in the publication.

Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and N. Hrabe. Contains all the data and programs described in this paper to generate the results discussed in the paper. Also contains all the results that are generated by the data and programs, with which the user can compare to check their results.

This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. Similar material for use in spectrometric methods of analysis is available as SRM 1297. This data is public in the Certificate of Analysis for this material.

Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a long-term investigation into the corrosion of bare steel and iron, pipes buried underground at 47 sites representing different soil types in the United States. Following the passage of the 2004 Pipeline Safety Improvement Act, the Department of Transportation's Office of Pipeline Safety requested that NIST review and reanalyze the data from the NBS study using modern statistical analysis tools. For this analysis, NIST compiled an updated database from the data in the publications by K. H. Logan (i.e.

This dataset contains thermographic measurements acquired during single and multiple track scans on bare substrates and on single layers of powder. The substrates and powder are nickel alloy 625 and the experiments are performed inside a commercial laser powder bed fusion machine. There are four experiment cases: 1) a single scan track on a bare substrate, 2) a single scan track on a single hand-spread layer of powder, 3) multiple (39) scan tracks covering an area on a bare substrate, and 4) multiple (39) scan tracks solidifying a single hand-spread layer of powder.

The National Institute of Standards and Technology, as part of its report on the collapse of the World Trade Center, characterized many important steels recovered from the buildings to provide stress-strain models to analyze the impact, fires, and resulting collapse. Those tests represent a large additional data set that can be used for modeling the response of steel structures to fire.

The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series, with two initial goals: 1) to allow modelers to test their simulations against rigorous, highly controlled additive manufacturing benchmark test data, and 2) to encourage additive manufacturing practitioners to develop novel mitigation strategies for challenging build scenarios.

These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and cooling rate challenge (CHAL-AMB2018-02-CR).