This MEMS Calculator determines the following thin film properties from data taken with an optical interferometer or comparable instrument: a) residual strain from fixed-fixed beams, b) strain gradient from cantilevers, c) step heights or thicknesses from step-height test structures, and d) in-plane lengths or deflections. Then, residual stress and stress gradient calculations can be made after an optical vibrometer or comparable instrument is used to obtain Young's modulus from resonating cantilevers or fixed-fixed beams.

References contained in this database are from Bibliography on Atomic Energy Levels and Spectra, NBS Special Publication 363 and Supplements, as well as current references since the last published bibliography collected by the NIST Atomic Spectroscopy Data Center (http://www.nist.gov/physlab/div842/grp01/asdc_info.cfm).

Standard Reference Material 131h Refined Cast Iron - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis. It can be used to validate value assignment of in-house reference materials and, if necessary, to calibrate carbon/sulfur analyzers. A unit of SRM 131h consists of a bottle containing 100 g of chips. This data is public in the Certificate of Analysis for this material.

Standard Reference Material 1632d Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1632d consists of 50 g of bituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

SRM 1632e Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix.

SRM 1633c Trace Elements in Coal Fly Ash - This Standard Reference Material (SRM) is intended for use in the evaluation of analytical methods for the determination of constituent elements in coal fly ash or materials of a similar matrix. SRM 1633c is a bituminous coal fly ash that was sieved through a nominal sieve opening of 74 µm (200 mesh) and then blended to assure homogeneity. A unit of SRM 1633c consists of 75 g of powdered material. This data is public in the Certificate of Analysis for this material.

SRM 1635a Trace Elements in Coal (Subbituminous) - This Standard Reference Material (SRM) is intended primarily for the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1635a consists of 50 g of subbituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

SRM 1946 Lake Superior Fish Tissue - This Standard Reference Material (SRM) is a frozen fish tissue homogenate that was prepared from lake trout (Salvelinus namaycush namaycush) collected near the Apostle Islands in Lake Superior (U.S./Canada), and is intended primarily for use in evaluating analytical methods for the determination of polychlorinated biphenyl (PCB) congeners, chlorinated pesticides, polybrominated diphenyl ether (PBDE) congeners, perfluorooctanesulfonic acid (PFOS), fatty acids (including omega-3 fatty acids), extractable fat, methylmercury, total mercury, proximates , ?-he

SRM 194a Ammonium Dihydrogen Phosphate - This Standard Reference Material (SRM) is a highly purified and homogeneous lot of crystalline ammonium dihydrogen phosphate (NH4H2PO4). It is intended primarily for use as a working standard in the calibration and standardization of procedures employed in the fertilizer industry for the determination of ammoniacal nitrogen and phosphorus. A unit of SRM 194a consists of one bottle containing 90 g of crystalline ammonium dihydrogen phosphate. This data is public in the Certificate of Analysis for this material.

SRM 1950 Metabolites in Frozen Human Plasma - This Standard Reference Material (SRM) is intended primarily for validation of methods for determining metabolites such as fatty acids, electrolytes, vitamins, hormones, and amino acids in human plasma and similar materials. This SRM can also be used for comparison of measurement technologies used in metabolomic studies and for quality assurance when assigning values to in-house reference materials. This SRM is intended to represent "normal" human plasma.