This set corresponds to a (pending) publication, where we attempt to model spectral features appearing in the lab by calculating many segments of an inhomogeneous field. Every data set here is a transmission value, either normalized to 1 in modeled data, or an arbitrary-scaled voltage reading from a photodiode onto an oscilloscope. These are given in scans over coupling photon detuning, delta_C, which is divided by 2 pi, and given in MHz. Arrays are scans over delta_C, and position/fieldstrength, for figure 3.

Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication. The specimens are machined in accordance with ASTM-E8 subsize specimen with a gauge width of 6 mm and a gauge thickness of 4 mm. Three specimens are tested at a nominal strain rate of 0.001 1/s and 2 specimens are tested at a nominal strain rate of 0.01 1/s on a servo hydraulic material testing machine using a constant crosshead displacement rate of 0.03175 mm/s and 0.3175 mm/s, respectively.

This repository contains scripts and supporting information for a set of demonstrations related to the 2022 AM-Bench challenge series.In particular, the data used in this demonstration comes from the 2018 AM-Bench challenge documented at https://www.nist.gov/ambench/amb2018-02-description.The script queries the AM-Bench 2018 repository located at https://ambench.nist.gov/, then processes the returned XML-based results, does some image processing, and generates plots of melt pool dep

Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a particular concern. This work measures as-built L-PBF surfaces with X-ray computed tomography, and uses rotating beam fatigue (RBF) testing to measure high cycle fatigue life. Surfaces with different, but consistent, characteristics are achieved by build in vertical specimens and changing only the number of contour passes.

The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate modeling of these strains and stresses is broadly recognized as an effective tool for mitigating these challenges, but rigorous validation data are needed. This data publication includes measurement data from diffraction-based characterizations of residual elastic strains in as-built (not heat treated) artifacts manufactured as part the the 2018 Additive Manufacturing Benchmark Series (AM Bench).

This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different studies. The IN718 parts were manufactured by laser powder bed fusion using a range of laser energy densities (manipulation of processing variables) and orientations with respect to the build direction. The influence of processing variables on resulting grain structures, pore structures, and mechanical properties were studied in the as-built (not heat treated) condition.

This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy 6061-T6using the NIST pulse-heated Kolsky Bar at strain rates between 2400 1/s and 2700 1/s and initialtemperatures from 23 °C to 527 °C and heating times ranging between 0.2 s and 3.5 s. At this time,the thermal history of the specimen during heating is not included in the dataset but this informationmay be included in a future update.

The database contains radiative line-binned opacities for lanthanides (atomic number 57<=Z<=70) and actinides (atomic number 89<=Z<=102) which are of paramount importance for simulation of light curves and spectra produced by kilonovae. The opacities were calculated by the LANL group under the assumption of local thermodynamic equilibrium. The temperature grid cover the range from 0.01 eV to 5.0 eV while the mass density grid covers 16 orders of magnitude. The database provide search and selection tools along with graphical and tabular outputs.

This data set contains files included in the detailed instructional demonstration paper submitted to Integrating Materials and Manufacturing Innovation. The detailed instructional demonstration paper includes documentation detailing how to configure and carry out a repeatable Rietveld Refinement with the software MAUD. The data set provides: diffraction data from two different neutron diffraction measurements, crystallographic information files, and configuration files for the refinement process.

The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and the Xray images acquired at the same time, along with timing data for synchronization. Also included is information about the experimental configuration including applied laser power, laser beam spatial profile, and the experimental setup. A text document is included that describes all files.