Dataset Search
Sort By
Search results
57 results found
Asynchronous AM Bench 2022 Challenge Data: Real-time, simultaneous absorptance and high-speed Xray imaging
Data provided by National Institute of Standards and Technology
The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and the Xray images acquired at the same time, along with timing data for synchronization. Also included is information about the experimental configuration including applied laser power, laser beam spatial profile, and the experimental setup. A text document is included that describes all files.
Tags: additive manufacturing,Laser Welding,
Modified: 2024-02-22
Views: 0
Calculation Sheet for Quasi-Static Position Calibration of the Galvanometer Scanner on the Additive Manufacturing Metrology Testbed
Data provided by National Institute of Standards and Technology
This dataset includes a Microsoft Excel spreadsheet (*.xlsx file) provided as supplemental material for the NIST Technical Note (TN-2099) publication titled "Quasi-Static Position Calibration of the Galvanometer Scanner on the Additive Manufacturing Metrology Testbed". The file contains two tabs, titled "Pre-Compensation" and "Post-Compensation", which provides example measurement data and calculations pertaining to the calibration procedures described in the publication.
Tags: additive manufacturing,calibration,Galvanometer,Laser Powder Bed Fusion,
Modified: 2024-02-22
Views: 0
Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and N. Hrabe
Data provided by National Institute of Standards and Technology
Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and N. Hrabe. Contains all the data and programs described in this paper to generate the results discussed in the paper. Also contains all the results that are generated by the data and programs, with which the user can compare to check their results.
Tags: additive manufacturing,metal powder,Laser Powder Bed Fusion,particle shape analysis,X-ray computed tomography. spherical harmonics,image analysis,powder analysis,powder particles,titanium alloy,Ti64,
Modified: 2024-02-22
Views: 0
Thermographic measurements of single and multiple scan tracks on nickel alloy 625 substrates with and without a powder layer in a commercial laser powder bed fusion process (an additive manufacturing technology)
Data provided by National Institute of Standards and Technology
This dataset contains thermographic measurements acquired during single and multiple track scans on bare substrates and on single layers of powder. The substrates and powder are nickel alloy 625 and the experiments are performed inside a commercial laser powder bed fusion machine. There are four experiment cases: 1) a single scan track on a bare substrate, 2) a single scan track on a single hand-spread layer of powder, 3) multiple (39) scan tracks covering an area on a bare substrate, and 4) multiple (39) scan tracks solidifying a single hand-spread layer of powder.
Tags: additive manufacturing,powder bed fusion,laser,thermography,temperature measurement,melt pool,melt pool length,cooling rate,Inconel 625,IN 625,nickel alloy 625,model validation,
Modified: 2024-02-22
Views: 0
Additive Manufacturing Benchmark Test Series (AM-Bench) 2018 Test Descriptions
Data provided by National Institute of Standards and Technology
The Additive Manufacturing Benchmark Test Series (AM-Bench) is developing a continuing series of controlled benchmark tests, in conjunction with a conference series, with two initial goals: 1) to allow modelers to test their simulations against rigorous, highly controlled additive manufacturing benchmark test data, and 2) to encourage additive manufacturing practitioners to develop novel mitigation strategies for challenging build scenarios.
Tags: Additive Manufacturing Benchmark Test Series (AM-Bench),additive manufacturing,model validation,nickel alloy 625,15-5 Stainless Steel,In Situ Measurements,Residual Stress,Distortion,microstructure,Laser Powder Bed Fusion,melt pool,
Modified: 2024-02-22
Views: 0
In Situ Thermography of Single Scan Tracks Performed on Nickel Super Alloy 625 for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018): Powder Bed Fusion Commercial Build Machine
Data provided by National Institute of Standards and Technology
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench), specifically supporting the melt pool geometry challenge (CHAL-AMB2018-02-MP) and cooling rate challenge (CHAL-AMB2018-02-CR).
Tags: additive manufacturing,benchmark tests,AMBench,AMBench 2018,powder bed fusion,nickel super alloy 625,IN625,thermography,temperature measurement,melt pool length,cooling rate,
Modified: 2024-02-22
Views: 0
In situ thermography of the metal bridge structures fabricated for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018)
Data provided by National Institute of Standards and Technology
These measurements were performed as part of the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench). This dataset and the associated experiments are part of a continuing series of controlled benchmark tests, in conjunction with a conference series, with two initial goals, 1) to allow modelers of Additive Manufacturing processes to test their simulations against rigorous, highly controlled additive manufacturing benchmark test data, and 2) to encourage additive manufacturing practitioners to develop novel mitigation strategies for challenging build scenarios.
Tags: additive manufacturing,benchmark tests,AMBench,AMBench 2018,powder bed fusion,nickel super alloy 625,IN625,thermography,cooling rate,temperature,
Modified: 2024-02-22
Views: 0
Variation of Surface Topography in Laser Powder Bed Fusion Additive Manufacturing of Nickel Super Alloy 625
Data provided by National Institute of Standards and Technology
This dataset provides surface height data from nickel super alloy 625 experiment samples built through laser powder bed fusion additive manufacturing. The experiment methodically varied part position and orientation relative to the build plate and recoater blade and details of the experiment and dataset are available in a Journal of Research at NIST article.
Tags: additive manufacturing,focus variation,IN625,Laser Powder Bed Fusion,nickel super alloy 625,surface texture,surface topography,
Modified: 2024-02-22
Views: 0
Additively manufactured CoCr lattice artifact -- 3D design
Data provided by National Institute of Standards and Technology
SolidWorks Part file (CAD file) for a CoCr "lattice" structure additively manufactured in a laser bed powder fusion (LPBF) system at NIST.
Tags: additive manufacturing,CoCr,lattice structure,CAD drawing,
Modified: 2024-02-22
Views: 0
Almanac API - Ranking by Geography ID within a State
Data provided by National Telecommunications and Information Administration
This API is designed to find the rankings by geography within the state for a specific metric (population or household) and rank (any of the metrics from provider, demographic, technology or speed). The results are the top ten and bottom ten records within the state for the particular geography type and my area rankings. Additionally we include +/- 5 rankings from the 'my' area rank.
Tags: ARRA,Broadband,Broadband Data Improvement Act,Community Anchor Institutions,FCC,NSGIC,NTIA,National Broadband Map,State Broadband Data and Development grant Program,State Broadband Initiative,gov20,opengov,
Modified: 2024-05-09
Views: 0