This Standard Reference Material (SRM) is in the form of chips sized between 0.50 and 1.18 mm sieve openings (35 and 16 mesh). It is intended for use primarily in chemical methods of analysis. Similar material for use in spectrometric methods of analysis is available as SRM 1297. This data is public in the Certificate of Analysis for this material.

SRM 1297 Stainless Steel (SAE 201) - 'This Standard Reference Material (SRM) is intended for use in optical emission and x-ray spectrometric methods of analysis. It is in the form of a disk approximately 32 mm in diameter and 19 mm thick. This data is public in the Certificate of Analysis for this material.

SRM 2452 Hydrogen in Titanium (Nominal Mass Fraction 60 mg/kg) - This Standard Reference Material (SRM) is intended for use in the evaluation of methods and the calibration of equipment used in the determination of hydrogen in titanium alloy. SRM 2452 consists of one bottle containing 10 g of titanium alloy chips. This data is public in the Certificate of Analysis for this material.

SRM 3239 Isoflavones Calibration Solution - This Standard Reference Material (SRM) is intended primarily for use in calibration of instruments and techniques used for the determination of isoflavones. SRM 3239 consists of two solutions containing isoflavones at levels that reflect the mass fraction ratios found in soy products. This data is public in the Certificate of Analysis for this material.

This Standard Reference Material (SRM) is intended for use as an analytical standard of known potassium (K) and chloride (Cl-) content. This lot of potassium chloride (KCl) was prepared to ensure a material of high purity and homogeneity and has been assayed after drying at 500 °C. A unit of SRM 999c consists of a single glass bottle containing 30 g of the material. This data is public in the Certificate of Analysis for this material.

NIST is developing metrics and test methods to benchmark the performance of robotic systems when performing manufacturing tasks. The ability to perform simple insertions is critical for robotic systems in manufacturing. A simple peg-in-hole test was designed to measure a robotic system's capability for performing these simple insertions. The dataset captures the performance metrics of a robotic system outfitted with a robotic hand and a robotic gripper to study the effect of next-generation robotic hand technology versus conventional parallel gripper technologies.

SRM 2193a Calcium Carbonate pH Standard [used as saturated Ca(OH)2 solution] - This Standard Reference Material (SRM) is intended for use in preparing solutions for calibrating electrodes for pH measuring systems at pH values above 11.0. This lot of calcium carbonate (CaCO3) was selected for its low level of alkali metal impurities. However, this SRM is certified ONLY as a pH standard, NOT as a pure substance. A unit of SRM 2193a consists of 30 g of CaCO3. This data is public in the Certificate of Analysis for this material.

SRM 635a Portland Cement (Blended with Slag) - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis of cements and materials of similar matrix for elemental contents. It can be used to validate value assignment of in-house reference materials. This data is public in the Certificate of Analysis for this material.

Radio Frequency Measurements for Selected Manufacturing and Industrial Environments using a PN Code Sounding methodology. The resulting measurements include complex impulse responses and spectrum analysis traces. Complex impulse responses were validated using both ray tracing and an outdoor two-ray reference facility. This data is meant to serve as a reference of how radio waves at 2.4 GHz and 5 GHz propagate in industrial environments.

This folder contains image data sets from 14 separate serial sectioning sessions. The entire data folder consists of 1379 8 bit tif images and is 47.3 GB in size. Serial sectioning was performed using FEI Helios 660 NanoLab focused ion beam scanning electron microscope (FIB SEM) and Auto Slice and View G3 software. The sample was a heavy metal stained and resin embedded Caenorhabditis elegans (C. elegans) that were exposed to 60 nm Au nanoparticles. Detailed descriptions of the worm preparation and resin block processing are described in Johnson, M.E. et al. (ACS Nano, 2016).