Videos and .stl files from Synergistic Fire Resistance of Nanobrick Wall Coated 3D Printed Photopolymer Lattices.The videos are from the fire tests of 3D printed photopolymer parts, from which time series still images were acquired. In these tests, printed parts (with or without a nanocoating) are subjected to direct blowtorch exposure until part failure (defined as when the part shatters). Most videos include time after torch removal while the part continues to burn.The .stl files are the files used to 3D print the parts studied in this work.

Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and nozzle type (standard and grid).

Measurement of the effect of electric field inhomogeneity on electromagnetically induced transparency in a waveguide-based cesium atomic vapor cell. Used for the figure for the Photonics West 2023 manuscript.

Although Rydberg atom-based electric field sensing provides key advantages over traditional antenna-based detection, it remains limited by the need for a local oscillator (LO) for low-field and phase resolved detection. In this work, we demonstrate the general applicability of closed-loop quantum interferometric schemes for Rydberg field sensing, which eliminate the need for an LO. We reveal that the quantum-interferometrically defined phase and frequency of our scheme provides an internal reference that enables LO-free full 360 degree-resolved phase sensitivity.

This dataset represents absorption/transmission spectra of resonant probe light power through a Rydberg atom vapor, subject to a simultaneous dressing field and a 'low frequency' field. Data is taken as an oscilloscope average of 5 photodiode voltage traces, with frequency offsets given by a simultaneous reference cell (not included). Some data are given as 2-D arrays, with axes of laser detuning across a waterfall of field strength. Some data represents theory eigen-energies of the system, for comparison. This paper will be submitted to Physical Review Letters.

This repository contains scripts and supporting information for a set of demonstrations related to the 2022 AM-Bench challenge series.In particular, the data used in this demonstration comes from the 2018 AM-Bench challenge documented at https://www.nist.gov/ambench/amb2018-02-description.The script queries the AM-Bench 2018 repository located at https://ambench.nist.gov/, then processes the returned XML-based results, does some image processing, and generates plots of melt pool dep

Macro-scale tensile data on additively manufactured (AM) IN625 in the as-built microstructural condition at room temperature and at different strain rates are provided in this data publication. The specimens are machined in accordance with ASTM-E8 subsize specimen with a gauge width of 6 mm and a gauge thickness of 4 mm. Three specimens are tested at a nominal strain rate of 0.001 1/s and 2 specimens are tested at a nominal strain rate of 0.01 1/s on a servo hydraulic material testing machine using a constant crosshead displacement rate of 0.03175 mm/s and 0.3175 mm/s, respectively.

X-ray computed tomography (XCT) datasets with known ground truth pores were developed using realistic XCT simulation. Non-overlapping spherical pores of varying sizes are randomly distributed in a cylindrical part near surfaces and within the core. Ground truth data, ground truth binary data, and reconstructed data for three different signal-to-noise ratios (SNRs) are provided. The data set can be used for evaluation and comparison of image segmentation/detection algorithms.

This set corresponds to a (pending) publication, where we attempt to model spectral features appearing in the lab by calculating many segments of an inhomogeneous field. Every data set here is a transmission value, either normalized to 1 in modeled data, or an arbitrary-scaled voltage reading from a photodiode onto an oscilloscope. These are given in scans over coupling photon detuning, delta_C, which is divided by 2 pi, and given in MHz. Arrays are scans over delta_C, and position/fieldstrength, for figure 3.

This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build direction (Z-axis) and a transverse-build direction (Y-axis). The specific temperatures of interest are 298 K, 523 K, and 773 K. The calibration data provided in this dataset corresponds to the build direction compression tests done at 298 K and 773 K.