This Standard Reference Material (SRM) is intended for use as an analytical standard of known purity. It is intended primarily for use in the calibration and standardization of procedures for potassium (K) and chloride (Cl-) determinations employed in clinical analysis, including those using ion-selective electrodes, and for routine critical evaluation of the daily working standards used in these procedures. This lot of potassium chloride (KCl) was prepared to ensure a material of high purity and homogeneity and has been assayed after heating at 110 degrees C to 120 degrees C.

A comparison of the expanded uncertainty for certified values of iodine in food matrix CRMs. The CRMS were found by searching The European Virtual Institute for Speciation Analysis (EVISA) database using the terms "Iodine" and "Certified" in the Material category. The uncertainties are expanded uncertainties at approximately 95% confidence.

The Inorganic Crystal Structure Database (ICSD) is produced cooperatively by the Fachinformationszentrum Karlsruhe (FIZ) and the National Institute of Standards and Technology (NIST). Components and devices used in a broad spectrum of technology sectors such as health care, communications, energy and electronics are manufactured from crystalline materials; the development of advanced crystalline materials requires accurate crystal-structure data.

This MEMS Calculator determines the following thin film properties from data taken with an optical interferometer or comparable instrument: a) residual strain from fixed-fixed beams, b) strain gradient from cantilevers, c) step heights or thicknesses from step-height test structures, and d) in-plane lengths or deflections. Then, residual stress and stress gradient calculations can be made after an optical vibrometer or comparable instrument is used to obtain Young's modulus from resonating cantilevers or fixed-fixed beams.

Standard Reference Material 131h Refined Cast Iron - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis. It can be used to validate value assignment of in-house reference materials and, if necessary, to calibrate carbon/sulfur analyzers. A unit of SRM 131h consists of a bottle containing 100 g of chips. This data is public in the Certificate of Analysis for this material.

SRM 1546a Meat Homogenate - This Standard Reference Material (SRM) is intended primarily for validation of methods for determining fatty acids, cholesterol, proximates, calories, elements, vitamins, and amino acids in canned meat products and similar materials. This SRM can also be used for quality assurance when assigning values to in-house reference materials. The meat homogenate is a mixture of pork and chicken products blended together in a commercial process. A unit of SRM 1546a consists of four cans, each containing approximately 85 g of material.

Standard Reference Material 1632d Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1632d consists of 50 g of bituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.

SRM 1632e Trace Elements in Coal (Bituminous) - This Standard Reference Material (SRM) is intended primarily for use in the evaluation of techniques used in the analysis of coals and materials of a similar matrix.

SRM 1633c Trace Elements in Coal Fly Ash - This Standard Reference Material (SRM) is intended for use in the evaluation of analytical methods for the determination of constituent elements in coal fly ash or materials of a similar matrix. SRM 1633c is a bituminous coal fly ash that was sieved through a nominal sieve opening of 74 µm (200 mesh) and then blended to assure homogeneity. A unit of SRM 1633c consists of 75 g of powdered material. This data is public in the Certificate of Analysis for this material.

SRM 1635a Trace Elements in Coal (Subbituminous) - This Standard Reference Material (SRM) is intended primarily for the evaluation of techniques used in the analysis of coals and materials of a similar matrix. A unit of SRM 1635a consists of 50 g of subbituminous coal that was ground to pass a 250 µm (60 mesh) sieve, homogenized, bottled under an argon atmosphere, and sealed in an aluminized bag. This data is public in the Certificate of Analysis for this material.