The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate modeling of these strains and stresses is broadly recognized as an effective tool for mitigating these challenges, but rigorous validation data are needed. This data publication includes measurement data from diffraction-based characterizations of residual elastic strains in as-built (not heat treated) artifacts manufactured as part the the 2018 Additive Manufacturing Benchmark Series (AM Bench).

This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different studies. The IN718 parts were manufactured by laser powder bed fusion using a range of laser energy densities (manipulation of processing variables) and orientations with respect to the build direction. The influence of processing variables on resulting grain structures, pore structures, and mechanical properties were studied in the as-built (not heat treated) condition.

This data set contains files included in the detailed instructional demonstration paper submitted to Integrating Materials and Manufacturing Innovation. The detailed instructional demonstration paper includes documentation detailing how to configure and carry out a repeatable Rietveld Refinement with the software MAUD. The data set provides: diffraction data from two different neutron diffraction measurements, crystallographic information files, and configuration files for the refinement process.

Data from peer-reviewed publication: G. Zhao et al., Frequency stabilization of a quantum cascade laser by weak resonant feedback from a Fabry-Perot cavity, Optics Letters. Frequency-stabilized mid-infrared lasers are valuable tools for precision molecular spectroscopy. However, their implementation remains limited by complicated stabilization schemes. Here we achieve optical self-locking of a quantum cascade laser to the resonant leak-out field of a highly mode-matched two-mirror cavity.

Data corresponding to Figs. 2,3,5,6,11,12,13,14 for Fleurbaey et al J. Quant Spectrosc. Radiat. Transf. vol 270, 107684 (2021). doi.org.10.1016/j.jqsrt.2021.107684

Here we provide curated analytical chemistry data for eggs collected from 1999 to 2010 on a subset of species and analytes that were measured regularly and reasonably systematically. Included in this publication are 487 samples analyzed for 174 ubiquitous environmental contaminants such as (poly)brominated diphenyl ethers (BDEs), mercury, organochlorine pesticides (OCPs), and polychlorinated biphenyls (PCBs). Data were collated to form a dataset useful in chemometric and related analyses of the marine ecosystem in the north Pacific Ocean.

The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and the Xray images acquired at the same time, along with timing data for synchronization. Also included is information about the experimental configuration including applied laser power, laser beam spatial profile, and the experimental setup. A text document is included that describes all files.

Thermal conductivity data acquired previously for the establishment of Standard Reference Material (SRM) 1450, Fibrous Glass Board, as well as subsequent renewals 1450a, 1450b, 1450c, and 1450d, are re-analyzed collectively and as individual data sets. Additional data sets for proto-1450 material lots are also included in the analysis (eleven data sets in total).

SRM 1450e Fibrous Glass Board - This Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials. SRM 1450e is a high-density fibrous glass board certified for bulk density and thermal conductivity. The SRM can be used in conjunction with ASTM C177 or ASTM C518. A unit of SRM 1450e consists of a square panel of fibrous glass and phenolic binder molded into a semi-rigid board.

This dataset includes a Microsoft Excel spreadsheet (*.xlsx file) provided as supplemental material for the NIST Technical Note (TN-2099) publication titled "Quasi-Static Position Calibration of the Galvanometer Scanner on the Additive Manufacturing Metrology Testbed". The file contains two tabs, titled "Pre-Compensation" and "Post-Compensation", which provides example measurement data and calculations pertaining to the calibration procedures described in the publication.