Abstract (from the manuscript): High cycle fatigue life of laser-powder bed fusion (L-PBF) parts depends on several factors; as-built surfaces, when present, are a particular concern. This work measures as-built L-PBF surfaces with X-ray computed tomography, and uses rotating beam fatigue (RBF) testing to measure high cycle fatigue life. Surfaces with different, but consistent, characteristics are achieved by build in vertical specimens and changing only the number of contour passes.

The development of large residual elastic strains and stresses during laser powder-bed fusion (LPBF) additive manufacturing is one of the most significant barriers to widespread adoption. Accurate modeling of these strains and stresses is broadly recognized as an effective tool for mitigating these challenges, but rigorous validation data are needed. This data publication includes measurement data from diffraction-based characterizations of residual elastic strains in as-built (not heat treated) artifacts manufactured as part the the 2018 Additive Manufacturing Benchmark Series (AM Bench).

This data repository provides a central location for a body of work using one build of nickel-based alloy 718 (IN718) material and resulted in three different studies. The IN718 parts were manufactured by laser powder bed fusion using a range of laser energy densities (manipulation of processing variables) and orientations with respect to the build direction. The influence of processing variables on resulting grain structures, pore structures, and mechanical properties were studied in the as-built (not heat treated) condition.

This data set contains files included in the detailed instructional demonstration paper submitted to Integrating Materials and Manufacturing Innovation. The detailed instructional demonstration paper includes documentation detailing how to configure and carry out a repeatable Rietveld Refinement with the software MAUD. The data set provides: diffraction data from two different neutron diffraction measurements, crystallographic information files, and configuration files for the refinement process.

These four data files contain datasets from an interlaboratory comparison that characterized a polydisperse five-population bead dispersion in water. A more detailed version of this description is available in the ReadMe file (PdP-ILC_datasets_ReadMe_v1.txt), which also includes definitions of abbreviations used in the data files. Paired samples were evaluated, so the datasets are organized as pairs associated with a randomly assigned laboratory number.

The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and the Xray images acquired at the same time, along with timing data for synchronization. Also included is information about the experimental configuration including applied laser power, laser beam spatial profile, and the experimental setup. A text document is included that describes all files.

Thermal conductivity data acquired previously for the establishment of Standard Reference Material (SRM) 1450, Fibrous Glass Board, as well as subsequent renewals 1450a, 1450b, 1450c, and 1450d, are re-analyzed collectively and as individual data sets. Additional data sets for proto-1450 material lots are also included in the analysis (eleven data sets in total).

SRM 1450e Fibrous Glass Board - This Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials. SRM 1450e is a high-density fibrous glass board certified for bulk density and thermal conductivity. The SRM can be used in conjunction with ASTM C177 or ASTM C518. A unit of SRM 1450e consists of a square panel of fibrous glass and phenolic binder molded into a semi-rigid board.

This dataset includes a Microsoft Excel spreadsheet (*.xlsx file) provided as supplemental material for the NIST Technical Note (TN-2099) publication titled "Quasi-Static Position Calibration of the Galvanometer Scanner on the Additive Manufacturing Metrology Testbed". The file contains two tabs, titled "Pre-Compensation" and "Post-Compensation", which provides example measurement data and calculations pertaining to the calibration procedures described in the publication.

Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and N. Hrabe. Contains all the data and programs described in this paper to generate the results discussed in the paper. Also contains all the results that are generated by the data and programs, with which the user can compare to check their results.