One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build AMB2022-CBM-B1 specimen TH1 and tested at room temperature using a quasistatic strain rate of 0.001/s to failure.  Microstructure was measured using x-ray computed tomography (XRCT) and scanning electron microscopy (SEM) techniques on the specimen gauge section or adjacent material.  Large-area electron backscatter diffraction was used to measure crystallographic texture and grain size/morphology of the entire

Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only.  96 tensile specimens were extracted from blocks at different tensile axis orientations with respect to the build direction to yield the following conditions: XY scan strategy (0, 30, 45, 60, and 90 degree orientation w.r.t. build direction) and X-only scan strategy (0, 60, 90 degree orientation w.r.t.

These images, videos, and tables show experimental data, where single lines of viscoelastic inks were extruded into moving viscoelastic support baths. Lines were printed at varying angles relative to the camera, such that videos and images captured the side of horizontal lines, cross-sections of horizontal lines, and the side of vertical lines. Metadata including pressure graphs, programmed speeds, toolpaths, and rheology data are also included.

In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and videos of the printing process during extrusion of single filaments. The zip file contains the state of the code when the associated paper was submitted. The link to the GitHub page goes to version 1.0.0, which is the same as the code attached here. From there, you can also access the current state of the code.Associated with: L. Friedrich, R. Gunther, J.

The absolute laser absorption was measured simultaneously with X-ray imaging during laser melting of Ti-6Al-4V solid metal. The data included here are the time-resolved absolute absorbed power and the Xray images acquired at the same time, along with timing data for synchronization. Also included is information about the experimental configuration including applied laser power, laser beam spatial profile, and the experimental setup. A text document is included that describes all files.

Speed of Sound Measurements of Binary Mixtures of Difluoromethane (R-32) with 2,3,3,3-Tetrafluoropropene (R-1234yf) or trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E)) Refrigerants

Data corresponding to Figs. 2,3,5,6,11,12,13,14 for Fleurbaey et al J. Quant Spectrosc. Radiat. Transf. vol 270, 107684 (2021). doi.org.10.1016/j.jqsrt.2021.107684

Dataset for generation of figures in Air-broadening in near-infrared carbon dioxide line shapes: quantifying contributions from O2, N2, and Ar (https://doi.org/10.1016/j.jqsrt.2021.107669)

This data set contains files included in the detailed instructional demonstration paper submitted to Integrating Materials and Manufacturing Innovation. The detailed instructional demonstration paper includes documentation detailing how to configure and carry out a repeatable Rietveld Refinement with the software MAUD. The data set provides: diffraction data from two different neutron diffraction measurements, crystallographic information files, and configuration files for the refinement process.

Hourly observations of carbon dioxide (CO2) and methane (CH4) mole fractions in dry air from tower- and rooftop-based sites in the Los Angeles Megacity Carbon Project network (currently 11 stations, with a 12th to be added in 2022). Carbon monoxide (CO) observations exist at several stations in this network but are not included in this data release pending additional calibration verification. Please contact the authors for higher frequency data, which are available on request. Data files are comma delimited (CSV).