This dataset represents the results of calculations of atomic absorption spectra for the case of two-color EIT. We compare computation methods, specifically Gaussian sampling, to find that one sampling method converges to smooth transmittance curves in less time than the other. We also include some example scripts which generate and plot the figure data.

This Photopolymer AM-Bench 2022 Challenge is to accurately model the relationship between photopatterned print fidelity and cure depth to exposure time with four resins, which serve to orthogonally probe the relationship between resin reactivity and viscosity. The data sets included here are broken down into three categories and are as follows: (1) resin characterization: Fourier transform infrared spectroscopy and rheometry, (2) light engine characterization: photomask dimensions, beam profilometry and radiometry, and (3) cure depth and profile: laser scanning confocal microscopy.

In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and videos of the printing process during extrusion of single filaments. The zip file contains the state of the code when the associated paper was submitted. The link to the GitHub page goes to version 1.0.0, which is the same as the code attached here. From there, you can also access the current state of the code.Associated with: L. Friedrich, R. Gunther, J.

These images, videos, and tables show experimental data, where single lines of viscoelastic inks were extruded into moving viscoelastic support baths. Lines were printed at varying angles relative to the camera, such that videos and images captured the side of horizontal lines, cross-sections of horizontal lines, and the side of vertical lines. Metadata including pressure graphs, programmed speeds, toolpaths, and rheology data are also included.

One additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 mesoscale tensile specimen (gauge dimensions approximately 0.2mm x 0.2 mm x 1mm) was extracted from build AMB2022-CBM-B1 specimen TH1 and tested at room temperature using a quasistatic strain rate of 0.001/s to failure.  Microstructure was measured using x-ray computed tomography (XRCT) and scanning electron microscopy (SEM) techniques on the specimen gauge section or adjacent material.  Large-area electron backscatter diffraction was used to measure crystallographic texture and grain size/morphology of the entire

Additively manufactured (AM) laser powder bed fusion (PBF-L) Inconel 625 blocks were built with two different scan strategies: XY and X-only.  96 tensile specimens were extracted from blocks at different tensile axis orientations with respect to the build direction to yield the following conditions: XY scan strategy (0, 30, 45, 60, and 90 degree orientation w.r.t. build direction) and X-only scan strategy (0, 60, 90 degree orientation w.r.t.

In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a moving bath. OpenFOAM is an open source computational fluid dynamics solver. This repository contains the following Python tools: - Tools for generating input files for OpenFOAM v1912 or OpenFOAM v8 tailored to a conical or cylindrical nozzle extruding a filament into a static support bath. - Tools for monitoring the status of OpenFOAM simulations and aborting them if they are too slow.

Temperature profiles of acrylonitrile butadiene styrene (ABS) filament during material extrusion additive manufacturing. Printing temperature and velocities cover the full "printable" range of the ABS filament and are corrected for reflected infrared photons. The profile of the active printing layer and two sub-layers are included. See the associated publication for the full experimental details.

On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use ofan additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonantsensing.

This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build direction (Z-axis) and a transverse-build direction (Y-axis). The specific temperatures of interest are 298 K, 523 K, and 773 K. The calibration data provided in this dataset corresponds to the build direction compression tests done at 298 K and 773 K.