This repository contains two types of datasets: 4D-STEM data collected from a thermal annealing series of P3MEEMT films. 4D-STEM data:Dose series: Collected from P3MEEMT film annealed at 115 C. Each HDF5 file was generated from the raw data using the fpdpy software package to reshape and embed metadata. No other preprocessing was performed. Annealing series: Collected from P3MEEMT films annealed at 75 C, 115 C, 145 C, and 175 C. Each temperature contains two sets of 4D-STEM data collected at low and high magnification.

SRM 2969 Electronic files containing certified values and their uncertainties, and the data used to assign those values

Electronic files containing certified values and their uncertainties, and the data used to assign those values.

These LC-MS and LC-MS/MS raw data were collected for purposes of an interlaboratory study evaluating the multi-attribute method (MAM). Tryptic digests of native NISTmAb (the "Reference" and the "Unknown" samples), degraded NISTmAb (the "pH Stress" sample) and NISTmAb spiked with 15 heavy-labeled synthetic peptides (the "Spike" sample) were sent to each participating laboratory. One injection of each digest was acquired in MS-only mode, while a second injection was acquired in MS/MS mode.

Materials discovery and development necessarily begins with the preparation and identification of product phase(s). Crystalline compounds can be identified by their characteristic diffraction patterns using X-rays, neutrons, and or electrons. An estimated 20,000 X-ray diffractometers and a comparable number of electron microscopes are used daily in materials research and development laboratories for this purpose.

This tutorial provides mechanical drawings, electrical schematics, parts lists, STL files for 3D-printed parts, IGS files, and instructions for automated machining necessary for construction of a dual-protease, subzero, liquid chromatography system for hydrogen-deuterium exchange mass spectrometry. Electrical schematics for construction of a multi-zone temperature controller that regulate to ±0.1 oC are also included in this tutorial.

Thermal conductivity data acquired previously for the establishment of Standard Reference Material (SRM) 1450, Fibrous Glass Board, as well as subsequent renewals 1450a, 1450b, 1450c, and 1450d, are re-analyzed collectively and as individual data sets. Additional data sets for proto-1450 material lots are also included in the analysis (eleven data sets in total).

SRM 1450e Fibrous Glass Board - This Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials. SRM 1450e is a high-density fibrous glass board certified for bulk density and thermal conductivity. The SRM can be used in conjunction with ASTM C177 or ASTM C518. A unit of SRM 1450e consists of a square panel of fibrous glass and phenolic binder molded into a semi-rigid board.

Supporting datasets and algorithms (R-based) for the manuscript entitled "Development of a Tool to Determine the Variability of Consensus Mass Spectra", including an R Markdown script to reproduce the manuscript's figures.

This Standard Reference Material (SRM) is intended for use as a primary calibration standard for the quantitative determination of barium. A unit of SRM 3104a consists of five 10 mL sealed borosilicate glass ampoules of an acidified aqueous solution prepared gravimetrically to contain a known mass fraction of barium. The solution contains nitric acid at a volume fraction of approximately 1 %, which is equivalent to a concentration (molarity) of approximately 0.16 mol/L. This data is public in the Certificate of Analysis for this material.