On-resonance Rydberg atom-based radio-frequency (RF) electric field sensing methods remain limited by the narrow frequency signal detection bands available by resonant transitions. The use ofan additional RF tuner field to dress or shift a target Rydberg state can be used to return a detuned signal field to resonance and thus dramatically extend the frequency range available for resonantsensing.

This set corresponds to a (pending) publication, where we attempt to model spectral features appearing in the lab by calculating many segments of an inhomogeneous field. Every data set here is a transmission value, either normalized to 1 in modeled data, or an arbitrary-scaled voltage reading from a photodiode onto an oscilloscope. These are given in scans over coupling photon detuning, delta_C, which is divided by 2 pi, and given in MHz. Arrays are scans over delta_C, and position/fieldstrength, for figure 3.

Sim-PROCESD is a discrete event simulation package written in Python that is designed to model the behavior of discrete manufacturing systems. Specifically, it focuses on asynchronous production lines. It also provides functionality for modeling the degradation and maintenance of machines in these systems. Sim-PROCESD provides class definitions for manufacturing devices/components that can be configured by the user to model various real-world manufacturing systems.

Workflow: The data that falls into this category are gathered from a measurement program and are published in the archival literature.

Speed of Sound Measurements of Binary Mixtures of Difluoromethane (R-32) with 2,3,3,3-Tetrafluoropropene (R-1234yf) or trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E)) Refrigerants

This repository contains two types of datasets: 4D-STEM data collected from a thermal annealing series of P3MEEMT films. 4D-STEM data:Dose series: Collected from P3MEEMT film annealed at 115 C. Each HDF5 file was generated from the raw data using the fpdpy software package to reshape and embed metadata. No other preprocessing was performed. Annealing series: Collected from P3MEEMT films annealed at 75 C, 115 C, 145 C, and 175 C. Each temperature contains two sets of 4D-STEM data collected at low and high magnification.

This database allows the public to browse and search recent FTZ Board manufacturing approvals.

The database contains radiative line-binned opacities for lanthanides (atomic number 57<=Z<=70) and actinides (atomic number 89<=Z<=102) which are of paramount importance for simulation of light curves and spectra produced by kilonovae. The opacities were calculated by the LANL group under the assumption of local thermodynamic equilibrium. The temperature grid cover the range from 0.01 eV to 5.0 eV while the mass density grid covers 16 orders of magnitude. The database provide search and selection tools along with graphical and tabular outputs.

The National Institute of Standards and Technology, Intelligent Systems Division has collected data measuring human subjects, while performing common, simulated industrial manufacturing tasks with and without wearing an exoskeleton. Five tests were completed as part of a research study to develop measurement science towards standard test methods. For simulated industrial manufacturing tasks were performed using a novel, now standardized apparatus, called the Position and Load Test Apparatus for Exoskeletons (PoLoTAE).

This dataset includes the position data of a two-dimensional gantry system experiment in which the G-code commands for the gantry were transmitted through a wireless communications link. The testbed is composed of four main components related to the operation of the gantry system. These components are the gantry system, the Wi-Fi network, the RF channel emulator, and the supervisory computer. In the experimental study, we run a scenario in which the gantry tool moves sequentially between four positions and has a preset dwell at each of the positions.